CS30BL STMicroelectronics, Current Sense Amplifier Single Single Ended 5-Pin SOT-23
- RS-stocknr.:
- 860-7514P
- Fabrikantnummer:
- CS30BL
- Fabrikant:
- STMicroelectronics
Bulkkorting beschikbaar
Subtotaal 25 eenheden (geleverd op een doorlopende strip)*
€ 54,20
(excl. BTW)
€ 65,575
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Tijdelijk niet op voorraad
- Verzending vanaf 06 april 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 25 - 45 | € 2,168 |
| 50 - 120 | € 1,952 |
| 125 - 245 | € 1,754 |
| 250 + | € 1,668 |
*prijsindicatie
- RS-stocknr.:
- 860-7514P
- Fabrikantnummer:
- CS30BL
- Fabrikant:
- STMicroelectronics
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | STMicroelectronics | |
| Power Supply Type | Single | |
| Typical Single Supply Voltage | 2.8 → 30 V | |
| Number of Channels per Chip | 2 | |
| Output Type | Single Ended | |
| Mounting Type | Surface Mount | |
| Package Type | SOT-23 | |
| Pin Count | 5 | |
| Dimensions | 3 x 1.75 x 1.3mm | |
| Height | 1.3mm | |
| Length | 3mm | |
| Width | 1.75mm | |
| Maximum Operating Temperature | +125 °C | |
| Minimum Operating Temperature | -40 °C | |
| Alles selecteren | ||
|---|---|---|
Merk STMicroelectronics | ||
Power Supply Type Single | ||
Typical Single Supply Voltage 2.8 → 30 V | ||
Number of Channels per Chip 2 | ||
Output Type Single Ended | ||
Mounting Type Surface Mount | ||
Package Type SOT-23 | ||
Pin Count 5 | ||
Dimensions 3 x 1.75 x 1.3mm | ||
Height 1.3mm | ||
Length 3mm | ||
Width 1.75mm | ||
Maximum Operating Temperature +125 °C | ||
Minimum Operating Temperature -40 °C | ||
Current Sensing Amplifiers, STMicroelectronics
Accurate sensing of currents in a circuit is central to enhance application safety.
Current Sensing Amplifiers have a voltage output that is proportional to the volt drop across a very low value resistor, usually in a high-current power rail. Hence they measure the current flowing in that power rail.
