onsemi Rail to Rail Current Sensing Amplifier Single 6-Pin SC-70
- RS-stocknr.:
- 178-4554P
- Fabrikantnummer:
- NCS199A1RSQT2G
- Fabrikant:
- onsemi
Bulkkorting beschikbaar
Subtotaal 500 eenheden (geleverd op een wiel)*
€ 122,50
(excl. BTW)
€ 148,00
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- 2.900 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 500 - 950 | € 0,245 |
| 1000 + | € 0,213 |
*prijsindicatie
- RS-stocknr.:
- 178-4554P
- Fabrikantnummer:
- NCS199A1RSQT2G
- Fabrikant:
- onsemi
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | onsemi | |
| Product Type | Current Sensing Amplifier | |
| Power Supply Type | Single | |
| Minimum Supply Voltage | 2.2V | |
| Maximum Supply Voltage | 26V | |
| CMRR - Common Mode Rejection Ratio | 100dB | |
| Number of Channels | 1 | |
| Supply Current | 80μA | |
| Mount Type | Surface | |
| Package Type | SC-70 | |
| Pin Count | 6 | |
| GBP - Gain Bandwidth Product | 90kHz | |
| Minimum Operating Temperature | -40°C | |
| Standards/Approvals | No | |
| Width | 1.35 mm | |
| Length | 2.2mm | |
| Series | NCS199 | |
| Height | 1mm | |
| Output Type | Rail to Rail | |
| Automotive Standard | No | |
| Maximum Operating Temperature | 125°C | |
| Alles selecteren | ||
|---|---|---|
Merk onsemi | ||
Product Type Current Sensing Amplifier | ||
Power Supply Type Single | ||
Minimum Supply Voltage 2.2V | ||
Maximum Supply Voltage 26V | ||
CMRR - Common Mode Rejection Ratio 100dB | ||
Number of Channels 1 | ||
Supply Current 80μA | ||
Mount Type Surface | ||
Package Type SC-70 | ||
Pin Count 6 | ||
GBP - Gain Bandwidth Product 90kHz | ||
Minimum Operating Temperature -40°C | ||
Standards/Approvals No | ||
Width 1.35 mm | ||
Length 2.2mm | ||
Series NCS199 | ||
Height 1mm | ||
Output Type Rail to Rail | ||
Automotive Standard No | ||
Maximum Operating Temperature 125°C | ||
- Land van herkomst:
- MY
The NCS199A1R is a voltage output current shunt monitor (also called current sense amplifier) which can measure voltage across shunts at common-mode voltages from -0.3 to 26V, independent of supply voltage. The low offset of the zero-drift architecture enables current sensing across the shunt with maximum voltage drop as low as 10 mV full-scale.
High-side current sensing for high voltage systems
Low Ohm value current sense resistors
High accuracy over temperature leading to better power efficiency
Wide supply voltage range provides system flexibilty