NCS199A1RSQT2G onsemi Rail to Rail Current Sensing Amplifier Single 6-Pin SC-70
- RS-stocknr.:
- 178-4554
- Fabrikantnummer:
- NCS199A1RSQT2G
- Fabrikant:
- onsemi
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 verpakking van 50 eenheden)*
€ 25,05
(excl. BTW)
€ 30,30
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Op voorraad
- Plus verzending 1.350 stuk(s) vanaf 10 augustus 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 50 - 450 | € 0,501 | € 25,05 |
| 500 - 950 | € 0,432 | € 21,60 |
| 1000 + | € 0,374 | € 18,70 |
*prijsindicatie
- RS-stocknr.:
- 178-4554
- Fabrikantnummer:
- NCS199A1RSQT2G
- Fabrikant:
- onsemi
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | onsemi | |
| Product Type | Current Sensing Amplifier | |
| Power Supply Type | Single | |
| Minimum Supply Voltage | 2.2V | |
| Maximum Supply Voltage | 26V | |
| CMRR - Common Mode Rejection Ratio | 100dB | |
| Number of Channels | 1 | |
| Supply Current | 80μA | |
| Mount Type | Surface | |
| Package Type | SC-70 | |
| Pin Count | 6 | |
| GBP - Gain Bandwidth Product | 90kHz | |
| Minimum Operating Temperature | -40°C | |
| Series | NCS199 | |
| Height | 1mm | |
| Standards/Approvals | No | |
| Length | 2.2mm | |
| Maximum Operating Temperature | 125°C | |
| Automotive Standard | No | |
| Output Type | Rail to Rail | |
| Alles selecteren | ||
|---|---|---|
Merk onsemi | ||
Product Type Current Sensing Amplifier | ||
Power Supply Type Single | ||
Minimum Supply Voltage 2.2V | ||
Maximum Supply Voltage 26V | ||
CMRR - Common Mode Rejection Ratio 100dB | ||
Number of Channels 1 | ||
Supply Current 80μA | ||
Mount Type Surface | ||
Package Type SC-70 | ||
Pin Count 6 | ||
GBP - Gain Bandwidth Product 90kHz | ||
Minimum Operating Temperature -40°C | ||
Series NCS199 | ||
Height 1mm | ||
Standards/Approvals No | ||
Length 2.2mm | ||
Maximum Operating Temperature 125°C | ||
Automotive Standard No | ||
Output Type Rail to Rail | ||
- Land van herkomst:
- MY
The NCS199A1R is a voltage output current shunt monitor (also called current sense amplifier) which can measure voltage across shunts at common-mode voltages from -0.3 to 26V, independent of supply voltage. The low offset of the zero-drift architecture enables current sensing across the shunt with maximum voltage drop as low as 10 mV full-scale.
High-side current sensing for high voltage systems
Low Ohm value current sense resistors
High accuracy over temperature leading to better power efficiency
Wide supply voltage range provides system flexibilty
Gerelateerde Links
- onsemi Rail to Rail Current Sensing Amplifier Single 6-Pin SC-70
- NCS199A3RSQT2G onsemi Rail to Rail Current Sensing Amplifier Single 6-Pin SC-70
- NCS199A2RSQT2G onsemi Rail to Rail Current Sensing Amplifier Single 6-Pin SC-70
- NCV214RSQT2G onsemi Rail to Rail Current Sensing Amplifier Single 6-Pin SC-70
- NCV210RSQT2G onsemi Rail to Rail Current Sensing Amplifier Single 6-Pin SC-70
- NCS210RSQT2G onsemi Rail to Rail Current Sensing Amplifier Single 6-Pin SC-70
- NCS213RSQT2G onsemi Rail to Rail Current Sensing Amplifier Single 6-Pin SC-70
- NCS214RSQT2G onsemi Rail to Rail Current Sensing Amplifier Single 6-Pin SC-70