Chauvin Arnoux B102 Current Clamp, AC Adapter, 400 A AC Max, Current Output
- RS-stocknr.:
- 799-9005
- Fabrikantnummer:
- P01120083
- Fabrikant:
- Chauvin Arnoux
Subtotaal (1 eenheid)*
€ 1.272,60
(excl. BTW)
€ 1.539,85
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Tijdelijk niet op voorraad
- Verzending 2 stuk(s) vanaf 30 september 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 1.272,60 |
*prijsindicatie
- RS-stocknr.:
- 799-9005
- Fabrikantnummer:
- P01120083
- Fabrikant:
- Chauvin Arnoux
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Chauvin Arnoux | |
| Adapter Type | AC | |
| Product Type | Current Clamp | |
| Maximum AC Current | 400A | |
| Accuracy | ≤ 0.35 % | |
| Maximum Conductor Size | 115mm | |
| Output Type | Current | |
| Cable Length | 1.5m | |
| Connector Type | 4 mm Plug | |
| Battery Type | LR6, Alkaline, AA | |
| Minimum Operating Temperature | -10°C | |
| Maximum Operating Temperature | 55°C | |
| Standards/Approvals | No | |
| Model Number | B102 | |
| Safety Category Level | CAT III, CAT IV | |
| Safety Category Voltage | 300, 600V | |
| Alles selecteren | ||
|---|---|---|
Merk Chauvin Arnoux | ||
Adapter Type AC | ||
Product Type Current Clamp | ||
Maximum AC Current 400A | ||
Accuracy ≤ 0.35 % | ||
Maximum Conductor Size 115mm | ||
Output Type Current | ||
Cable Length 1.5m | ||
Connector Type 4 mm Plug | ||
Battery Type LR6, Alkaline, AA | ||
Minimum Operating Temperature -10°C | ||
Maximum Operating Temperature 55°C | ||
Standards/Approvals No | ||
Model Number B102 | ||
Safety Category Level CAT III, CAT IV | ||
Safety Category Voltage 300, 600V | ||
Vrijgesteld
- Land van herkomst:
- FR
B102 Leakage Current Clamp
The B102 current clamp is designed for measuring leakage current diverted towards the earth. It enables the fault to be located or anticipated without disconnecting the equipment linked. The current clamp is specially designed to detect low fault currents on power circuits.
The measurements can be MADE on any type of installation: single-phase, 3 or 4 wire threephase, balanced or not, with the NEUTRAL grounded earth or impedant
Differential or leakage current, from 500 μA
Current up to 400 A max
2 measurement ranges: 4 A AC / 400 A AC
Bandwidth: 48 Hz to 1000 Hz
Output: 1.5 m cord with double insulation having male safety plugs 4mm in diameter
Gerelateerde Links
- Chauvin Arnoux Current Clamp, AC Adapter, 3000 A AC Max
- Chauvin Arnoux Current Clamp, AC Adapter, 700 A AC Max
- Chauvin Arnoux Current Clamp, AC Adapter, 240 A AC Max, Current Output
- Chauvin Arnoux Current Clamp, AC Adapter, 1200 A ac AC Max
- Chauvin Arnoux Current Clamp, AC Adapter, 12 A ac AC Max
- Chauvin Arnoux Current Clamp, AC Adapter, 200 A ac AC Max
- Chauvin Arnoux Current Clamp, AC Adapter, 150 A ac AC Max
- Chauvin Arnoux Current Clamp, AC Adapter, 500 A ac AC Max