Fluke I30S Current Clamp, 20A DC Max, AC/DC Adapter, 30 A AC Max, Voltage Output

RS-stocknr.:: 645-1836
Fabrikantnummer:: I30S
Fabrikant:: Fluke

Fluke I30S Current Clamp, 20A DC Max, AC/DC Adapter, 30 A AC Max, Voltage Output

Prijs Per stuk**

€ 890,00

(excl. BTW)

€ 1.076,90

(incl. BTW)

3 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)*

12 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)

* Bezorgdata kunnen veranderen afhankelijk van de gekozen hoeveelheid en het bezorgadres.

GRATIS bezorging voor bestellingen vanaf 75,00 €

Aantal stuks	Per stuk
1 +	€ 890,00

**prijsindicatie

RS-stocknr.:: 645-1836
Fabrikantnummer:: I30S
Fabrikant:: Fluke

i30s 30A High Resolution, High Bandwidth Oscilloscope Current Probe

The i30 may be used in conjunction with bench and portable oscilloscopes for accurate non-intrusive ac & dc current measurement.,Applications include: inverters, switch mode power supplies, industrial controllers, automotive leakage currents and other applications requiring accurate isolated current measurement.

Hall effect sensing of a.c. and d.c. current
Power LED warns of low battery by flashing
Zero adjust knob to accommodate offsets
The wide, flat frequency response means this probe exhibits a fast response when measuring current pulses
2.0m flying lead terminated with 50Ω BNC plugs
Designed to meet EN61010-1, EN61010-2-032 installation CAT III 300V
Withstands overloads to 500A

Warning

Use of the probe on uninsulated conductors is limited to 300 V ac rms or dc and frequencies below 1 kHz.

Supplied with

Alkaline PP3 battery, 4mm shrouded plug adaptor and operators manual.

Fluke AC/DC Current Clamp

Features and Benefits

Hall effect sensing of AC/DC current

Current range: 30 mA to 30 A DC, 30 mA to 20 A AC rms

Usable current range: 5 mA to 30 A DC, 30 mA to 20 A AC rms

Frequency range: DC to 100 kHz (-0.5 dB)

Low battery indicator - power LED warns of low battery by flashing

Zero adjust knob to accommodate offsets

The wide, flat frequency response means this probe exhibits a fast response when measuring current pulses

2 m lead terminated with 50Ω BNC plugs

Designed to meet EN61010-1, EN61010-2-032 installation CAT III 300V

Withstands overloads to 500A

Power supply - 9 V Alkaline, MN1604/PP3, 30 hours

Maximum conductor size - 19 mm diameter

Output connection - Safety BNC connector, supplied with safety 4 mm adapter

Weight - 250g

Dimensions - 183 mm x 71 mm x 25 mm

Applications

Inverters
Switch mode power supplies industrial controllers
Automotive leakage currents
Applications requiring accurate isolated current measurement
Waveform analysis

Certifications

CAT III 300V
IEC 61010-1
Pollution degree 2
IEC 61010-2-032
IEC 61326-1
CE certified
cCSAus certified
EN61010-1
EN61010-2-032

Kenmerk	Waarde
Adapter Type	AC/DC
Maximum DC Current	20A
Maximum AC Current	30 A
Best Accuracy	±1% + 2 mA
Maximum Conductor Size	19mm
Safety Category	CAT III 300V
Output Type	Voltage
Connector Type	BNC
Maximum Bandwidth	100kHz
Battery Type	9 V
Battery Life	30 h
Cable Length Extended	2m
Maximum Operating Temperature	+50°C
Minimum Operating Temperature	0°C
Bandwidth	DC → 100kHz
Safety Category Level	CAT III
Safety Category Voltage	300V
Model Number p	I30S