Onlangs gezocht

    TE Connectivity Ratcheting Hand Crimping Tool for DuraSeal and PolyCrimp terminals

    RS-stocknr.:
    864-6900
    Fabrikantnummer:
    AD-1522-1-CRIMPING-TOOL
    Fabrikant:
    TE Connectivity
    TE Connectivity
    Bekijk alle Crimp Tools
    Tijdelijk niet op voorraad nieuwe voorraad verwacht op 28/09/2022, met een levertijd van 1 werkdag.
    Add to Basket
    Aantal stuks

    Toegevoegd

    Prijs Each

    209,23 €

    (excl. BTW)

    253,17 €

    (incl. BTW)

    Aantal stuksPer stuk
    1 +209,23 €
    RS-stocknr.:
    864-6900
    Fabrikantnummer:
    AD-1522-1-CRIMPING-TOOL
    Fabrikant:
    TE Connectivity

    Vrijgesteld

    Land van herkomst:
    US

    Wetgeving en conformiteit

    Vrijgesteld

    Land van herkomst:
    US

    Productomschrijving

    TE Connectivity AD-1522-1 Hand Crimping Tool for DuraSeal Splices


    The Importance of a High-Quality Crimp


    When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage


    TE Connectivity DuraSeal Handing Crimping Tool - Overview


    From TE Connectivity, an easy to use hand operated crimping tool made from high-quality materials for crimping DuraSeal crimp splices onto wire. The crimping tool consists of handles and two crimping jaws. The crimping jaws contain three crimping chambers with clearly marked wire sizes. The crimping tool is supplied with a pre-set crimp depth to ensure that the correct combination of tensile strength and insulation integrity is achieved when crimping. A ratchet controlled release mechanism ensures that the handles of the crimp tool do not release until a full crimp cycle is achieved.


    Key Features and Benefits


    • Easy to use with a smooth operation
    • Pre-set crimp depth ensures crimp integrity
    • Ratchet controlled release mechanism ensures full crimp cycle
    • Crimping cavities are polished for maximum crimping reliability
    • Ergonomic design for operator comfort


    Questions and Answers


    What terminals can this tool be used with?
    This hand crimping tool is used for crimping DuraSeal splices with a wire size range from 22 to 10 AWG

    What Kind of Crimp Does this Tool Produce?
    This tool produces an open barrel style crimp



    TE Connectivity Hand Crimp Tools for Splice Terminals


    Specificaties

    KenmerkWaarde
    SeriesAD
    Crimp Connector TypeDuraSeal and PolyCrimp terminals
    Crimp Tool TypeCrimping Tool
    OperationHand
    For Use WithSplices 10-22 AWG
    Wire Size mm²0.3 → 5mm²
    Wire Size AWG22 → 10AWG
    RatchetingYes
    Overall Length228.6 mm
    Tijdelijk niet op voorraad nieuwe voorraad verwacht op 28/09/2022, met een levertijd van 1 werkdag.
    Add to Basket
    Aantal stuks

    Toegevoegd

    Prijs Each

    209,23 €

    (excl. BTW)

    253,17 €

    (incl. BTW)

    Aantal stuksPer stuk
    1 +209,23 €