ITT Cannon Trident Series Male Crimp Terminal, 18 AWG Min Crimp, 16 AWG Max
- RS-stocknr.:
- 468-541
- Fabrikantnummer:
- T2P16MC1LZ / 192990-0100
- Fabrikant:
- ITT Cannon
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 verpakking van 10 eenheden)*
€ 12,80
(excl. BTW)
€ 15,50
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Op voorraad
- 570 stuk(s) klaar voor verzending
- 17.560 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 10 - 10 | € 1,28 | € 12,80 |
| 20 - 30 | € 1,255 | € 12,55 |
| 40 - 50 | € 1,23 | € 12,30 |
| 60 - 70 | € 1,204 | € 12,04 |
| 80 + | € 1,164 | € 11,64 |
*prijsindicatie
- RS-stocknr.:
- 468-541
- Fabrikantnummer:
- T2P16MC1LZ / 192990-0100
- Fabrikant:
- ITT Cannon
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | ITT Cannon | |
| Product Type | Crimp Terminal | |
| Gender | Male | |
| For Use With | Trident Circular Connector Housing | |
| Current | 13A | |
| Series | Trident | |
| Minimum Wire Size AWG | 18AWG | |
| Minimum Wire Size mm² | 0.5mm² | |
| Contact Plating | Gold | |
| Contact Material | Brass | |
| Maximum Wire Size AWG | 16AWG | |
| Maximum Wire Size mm² | 1.5mm² | |
| Maximum Contact Resistance | 5mΩ | |
| Termination Type | Crimp | |
| Minimum Operating Temperature | -55°C | |
| Maximum Operating Temperature | 125°C | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk ITT Cannon | ||
Product Type Crimp Terminal | ||
Gender Male | ||
For Use With Trident Circular Connector Housing | ||
Current 13A | ||
Series Trident | ||
Minimum Wire Size AWG 18AWG | ||
Minimum Wire Size mm² 0.5mm² | ||
Contact Plating Gold | ||
Contact Material Brass | ||
Maximum Wire Size AWG 16AWG | ||
Maximum Wire Size mm² 1.5mm² | ||
Maximum Contact Resistance 5mΩ | ||
Termination Type Crimp | ||
Minimum Operating Temperature -55°C | ||
Maximum Operating Temperature 125°C | ||
Standards/Approvals No | ||
Crimp Two Piece Contacts
ITT TNM Shielded
The TNM connector range builds on the popular Trident and Neptune ranges from ITT Cannon. They feature full metal construction giving high reliability and durability.
RF shielding inherent in the full metal construction
Backshells enable cable braid termination so meeting EMC requirements
Signal versions have the same planform & contact arrangements as the QM range so upgrading and interchangeability can be achieved
Includes a rear rubber seal that enables IP67 rating to be maintained if only some contacts are used. The rubber seal can be discarded if a backshell is to be used. Both are rated to IP67
Cable, chassis and jam nut configurations available in standard and reversed formats
One, two or three part crimp contacts, also solder cup and PCB terminating contacts available for signal transfer. Power contacts are only required for power/signal connector types
Note
To maintain IP67 rating wire insulation diameters should be within the following diameters: Signal wires: 1.7-2.7mm Power wires: 2.7-4mm.
Use plier or ratchet style tool to crimp signal contacts. Use ratchet tool only to crimp power contacts.
Use plier or ratchet style tool to crimp signal contacts. Use ratchet tool only to crimp power contacts.
Gerelateerde Links
- ITT Cannon Trident Series Male Crimp Terminal, 18 AWG Min Crimp, 16 AWG Max
- ITT Cannon Trident Series Male Crimp Terminal, 26 AWG Min Crimp, 24 AWG Max
- ITT Cannon, Trident Locator
- ITT Cannon Male Crimp Crimp Pin Connector, Contact Size 16/18 AWG
- ITT Cannon Female Crimp Crimp Pin Connector, Contact Size 16/18 AWG
- ITT Cannon Trident Series Male Crimp Terminal, 20 AWG Min Crimp, 20 AWG Max
- ITT Cannon Crimp Extraction Tool, Cannon Trident Series, Extraction Tool Contact, Contact size 18 to 16 AWG
- ITT Cannon, Trident Snap Key for use with Cannon Trident Series