RS PRO 85 mm, 28 mm Bore, 23.5 mm Length, 29 mm Length 90 mm Coupler
- RS-stocknr.:
- 183-192
- Fabrikant:
- RS PRO
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 23,42
(excl. BTW)
€ 28,34
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- 2 stuk(s) klaar voor verzending vanaf een andere locatie
- Plus verzending 11 stuk(s) vanaf 18 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 23,42 |
| 5 - 9 | € 22,95 |
| 10 + | € 22,47 |
*prijsindicatie
- RS-stocknr.:
- 183-192
- Fabrikant:
- RS PRO
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | RS PRO | |
| Bore Size | 28 mm | |
| Size | 90 mm | |
| Product Type | Coupler | |
| Length | 29mm | |
| Bore Length | 23.5mm | |
| Hub Type | F Flange | |
| Minimum Operating Temperature | -40°C | |
| Material | Nitrile Rubber (NBR) | |
| Maximum Operating Temperature | 100°C | |
| Series | HRC | |
| Standards/Approvals | RoHS | |
| Bore Type | Tapered | |
| Overall Diameter | 85mm | |
| Alles selecteren | ||
|---|---|---|
Merk RS PRO | ||
Bore Size 28 mm | ||
Size 90 mm | ||
Product Type Coupler | ||
Length 29mm | ||
Bore Length 23.5mm | ||
Hub Type F Flange | ||
Minimum Operating Temperature -40°C | ||
Material Nitrile Rubber (NBR) | ||
Maximum Operating Temperature 100°C | ||
Series HRC | ||
Standards/Approvals RoHS | ||
Bore Type Tapered | ||
Overall Diameter 85mm | ||
- Land van herkomst:
- CN
HRC Coupling
HRC semi elastic couplings for general purpose use. Available as F flange type, bush mounted from inside, and H flange bush, inserted from outside face.
Taper Bush Fixing Allows Quick and Easy Assembly
Simple Alignment by Straight Edge
Accommodates Minor Misalignment
Wrench Clearance for Tightening Bush on Shaft is 29mm (size 70, 90) and 38mm (size 110, 130) – Use of Shortened Wrench will Reduce the Required Dimensions
Standard Nitrile Rubber Insert
Temperature Range -40°C to +100°C
Note
One complete coupling comprises of two flanges and one insert (to be ordered separately).
Warning
Not FRAS approved.
Gerelateerde Links
- RS PRO 85 mm, 28 mm Bore, 23.5 mm Length, 29 mm Length 90 mm Coupler
- RS PRO 69 mm, 25 mm Bore, 23.5 mm Length, 29 mm Length 70 mm Coupler
- OPTIBELT 85 mm, 69.5 mm Length, 23.5 mm Length 90 Half Coupling Flange
- Huco, 66 mm OD 28 mm, 89 mm Length Coupler 28 mm
- Huco, 56 mm OD 28 mm, 73 mm Length Coupler 28 mm
- Huco, 66 mm OD 28 mm, 79 mm Length Coupler 28 mm
- Hengstler, 19.2 mm OD, 28 mm Length Coupler
- Ruland 16 mm, 6 mm Bore, 23.5 mm Length, 23.5 mm Length HRC Coupling Hubs