Kubler SK 07.1 Counter, 7 Digit, 10Hz, 12 V dc
- RS-stocknr.:
- 202-1166
- Fabrikantnummer:
- 1.132.101.012
- Fabrikant:
- Kubler
Afbeelding representeert productcategorie
Subtotaal (1 eenheid)*
€ 35,47
(excl. BTW)
€ 42,92
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Tijdelijk niet op voorraad
- Verzending vanaf 14 januari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 35,47 |
*prijsindicatie
- RS-stocknr.:
- 202-1166
- Fabrikantnummer:
- 1.132.101.012
- Fabrikant:
- Kubler
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Kubler | |
| Supply Voltage | 12 V dc | |
| Count Mode | Impulses | |
| Function | Counter | |
| Input Type | Voltage | |
| Connection Type | Clamp | |
| Reset Method | No Reset | |
| Number of Digits | 7 | |
| Mounting Type | DIN Rail | |
| Count Direction | Up | |
| Digit Height | 4 mm | |
| Maximum Count Frequency | 10Hz | |
| Minimum Operating Temperature | -10°C | |
| Series | SK 07.1 | |
| Maximum Operating Temperature | +60°C | |
| Weight | 55g | |
| Alles selecteren | ||
|---|---|---|
Merk Kubler | ||
Supply Voltage 12 V dc | ||
Count Mode Impulses | ||
Function Counter | ||
Input Type Voltage | ||
Connection Type Clamp | ||
Reset Method No Reset | ||
Number of Digits 7 | ||
Mounting Type DIN Rail | ||
Count Direction Up | ||
Digit Height 4 mm | ||
Maximum Count Frequency 10Hz | ||
Minimum Operating Temperature -10°C | ||
Series SK 07.1 | ||
Maximum Operating Temperature +60°C | ||
Weight 55g | ||
- Land van herkomst:
- DE
Two Module Wide Counter SK07
Compact adding counter for DIN rail mounting to DIN 46277
Highly shock proof - IP50 front panel
Data retention at power failure
Long life time (50 million counts)
Highly shock proof - IP50 front panel
Data retention at power failure
Long life time (50 million counts)
PCB, Surface & DIN Rail Mounting
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the count or reset coil terminals.,Count rate of all products is 10Hz.
Gerelateerde Links
- Kubler SK 07.1 Counter, 7 Digit, 10Hz, 230 V ac
- Kubler SK 07.1 Counter, 7 Digit, 10Hz, 115 V ac
- Kubler SK 07.1 Counter, 7 Digit, 25Hz, 24 V dc
- Kubler W17.50 Counter, 7 Digit, 10Hz, 12 V dc
- Kubler K07 Counter, 7 Digit, 10Hz, 12 V dc
- Kubler K 47.20 Counter, 7 Digit, 10Hz
- Kubler K 07.90 Counter, 7 Digit, 10Hz, 12 V dc
- Kubler K 47.20 Counter, 7 Digit, 10Hz, 12 V dc
