Hengstler SIGNO 721 Counter, 5 Digit LCD, 60kHz, 12 → 30 V dc

Bekijk alle Counters
Bulkkorting beschikbaar

Subtotaal (1 eenheid)*

€ 179,05

(excl. BTW)

€ 216,65

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 7 stuk(s) klaar voor verzending
  • 3 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 - 4€ 179,05
5 - 9€ 174,03
10 +€ 169,39

*prijsindicatie

RS-stocknr.:
546-795
Artikelnummer Distrelec:
303-25-986
Fabrikantnummer:
0 721 201
Fabrikant:
Hengstler
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Hengstler

Supply Voltage

12 → 30 V dc

Count Mode

Impulses

Display Type

LCD

Function

Counter

Input Type

Voltage

Connection Type

Plug, Screw

Reset Method

Automatic, Manual

Number of Digits

5

Mounting Type

DIN Rail

Output / Interface

Relay

Digit Height

12 mm

Backlighting

Yes

Maximum Count Frequency

60kHz

Series

SIGNO 721

Minimum Operating Temperature

0°C

Maximum Operating Temperature

+50°C

Weight

200g

Land van herkomst:
DE

Preset Counter - Signo 721.2


Single or dual preset counter
IP65 rated
Counting Operating modes -one channel add or subtract; Direction mode; differential mode (add/sub); totalizing mode (add/add); phase discriminator
Programmable reset back to 0 or back to preset 2 (externally resettable)
Overwriting of counter reading is possible
Keylock can be absolute or separately set to allow correction and/or prescaler
Please Note: The highest count frequency of 60 kHz can only be reached at a special calibration and parameter, this is otherwise quoted to 30 kHz

Note

Please Note: The highest count frequency of 60 kHz can only be reached at a special calibration and parameter, this is otherwise quoted to 30 kHz

Approvals

UL, CSA


Hengstler Panel Mounting 48 x 48


Range of resettable counters with data retention rated at greater then 10 years. Prescaler options and Multiplier scaling outputs for correctly displaying engineering units. Units have a maximum count frequency of either 30Hz or 5kHz depending on setting. Inputs are either NPN/PNP signal or contact closure.

Gerelateerde Links