Hengstler SIGNO 721 Counter, Counter, 5 Digit LCD, 60 kHz 30V dc

RS-stocknr.:: 546-795
Artikelnummer Distrelec:: 303-25-986
Fabrikantnummer:: 0 721 201
Fabrikant:: Hengstler

Hengstler SIGNO 721 Counter, Counter, 5 Digit LCD, 60 kHz 30V dc

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (1 eenheid)*

€ 179,05

(excl. BTW)

€ 216,65

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Op voorraad

4 stuk(s) klaar voor verzending
5 stuk(s) klaar voor verzending vanaf een andere locatie
Plus verzending 4 stuk(s) vanaf 18 juni 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 - 4	€ 179,05
5 - 9	€ 174,03
10 +	€ 169,39

*prijsindicatie

RS-stocknr.:: 546-795
Artikelnummer Distrelec:: 303-25-986
Fabrikantnummer:: 0 721 201
Fabrikant:: Hengstler

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Hengstler
	Product Type	Counter
	Count Mode	Impulse
	Display Type	LCD
	Function	Counter
	Connection Type	Screw, Plug
	Reset Method	Automatic & Manual
	Number of Digits	5
	Mount Type	DIN Rail
	Maximum Supply Voltage	30V dc
	Digit Height	12mm
	Minimum Operating Temperature	0°C
	Backlighting	Yes
	Maximum Operating Temperature	50°C
	Standards/Approvals	No
	Maximum Count Frequency	60kHz
	Depth	110mm
	Weight	200g
	Cutout Height	45mm
	Cutout Width	45mm
	Series	SIGNO 721

	Alles selecteren
	Merk Hengstler
	Product Type Counter
	Count Mode Impulse
	Display Type LCD
	Function Counter
	Connection Type Screw, Plug
	Reset Method Automatic & Manual
	Number of Digits 5
	Mount Type DIN Rail
	Maximum Supply Voltage 30V dc
	Digit Height 12mm
	Minimum Operating Temperature 0°C
	Backlighting Yes
	Maximum Operating Temperature 50°C
	Standards/Approvals No
	Maximum Count Frequency 60kHz
	Depth 110mm
	Weight 200g
	Cutout Height 45mm
	Cutout Width 45mm
	Series SIGNO 721

Datasheet

Land van herkomst:: DE

Preset Counter - Signo 721.2

Single or dual preset counter

IP65 rated

Counting Operating modes -one channel add or subtract; Direction mode; differential mode (add/sub); totalizing mode (add/add); phase discriminator

Programmable reset back to 0 or back to preset 2 (externally resettable)

Overwriting of counter reading is possible

Keylock can be absolute or separately set to allow correction and/or prescaler

Please Note: The highest count frequency of 60 kHz can only be reached at a special calibration and parameter, this is otherwise quoted to 30 kHz

Hengstler Panel Mounting 48 x 48

Range of resettable counters with data retention rated at greater then 10 years. Prescaler options and Multiplier scaling outputs for correctly displaying engineering units. Units have a maximum count frequency of either 30Hz or 5kHz depending on setting. Inputs are either NPN/PNP signal or contact closure.

Note

Please Note: The highest count frequency of 60 kHz can only be reached at a special calibration and parameter, this is otherwise quoted to 30 kHz

Approvals

UL, CSA