Eaton Push Button Control Station, 2 Cutouts, IP65, IP67

Bekijk alle Control Stations

Subtotaal (1 eenheid)*

€ 273,27

(excl. BTW)

€ 330,66

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 6 stuk(s) klaar voor verzending
  • 40 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 273,27

*prijsindicatie

RS-stocknr.:
321-161
Fabrikantnummer:
GHG4118201R1308
Fabrikant:
Eaton
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Eaton

Series

CROUSE-HINDS

Number of Cutouts

2

Enclosure Colour

Black

IP Rating

IP65, IP67

Cutout Diameter

22mm

Length

125mm

Width

85mm

Hazardous Area Certification

ATEX

Depth

77.5mm

Maximum Current

16A

Minimum Operating Temperature

-20°C

Maximum DC Voltage

110V

Maximum AC Voltage

500V

Maximum Operating Temperature

+40°C

Vrijgesteld

Land van herkomst:
DE

Dual Pushbutton


Start and Stop pushbuttons
Depth: 90mm

Certificate No.

PTB 00 ATEX 3117

Group and Category

II 2 G EEx e d IIC T6

Eaton CEAG Start Stop Control Station - Crouse-Hinds Series - GHG4118201R1308


Looking for a control station to provide reliable circuit protection? This CEAG push-button unit from Eaton's Crouse-Hinds series effectively manages power and offers durability. Hard-wearing thermoplastic housing provides excellent insulation and makes the controller highly resistant to impact and chemicals. Its IP67 (ingress protection) rating also ensures it's completely dust-tight and water-resistant, while explosion protection means the unit is safe for use in hazardous commercial and industrial environments.
The stop and start push buttons snap in and out quickly for easy wiring. This product is ideal for off-shore applications and circuit-control tasks in demanding mechanical and chemical conditions.

• Low side walls for optimal cable connection
• M20 bottom cable entry with cable gland for ease of installation
• Notches in the mounting rails to stop built-in components from twisting out of place

What is an explosion-protected product?


Explosion protection indicates that the control station is Zone 1 and 2 ATEX (atmosphere explosible) certified. This means it's universally approved for use in areas where explosive gases are likely to be present during normal operation.

Where can I mount this control station?


This unit is suitable for wall mounting. It's supplied with fixing holes that are easily accessible without the need to break the seal on the enclosure cover.

Note

Eaton formerly known as CEAG
Push buttons 202-3881 or 202-3897 or pilot light 202-3932 can be used.


CEAG Hazardous Area


Suitable for use in Zone 1 hazardous areas
Impact resistant thermoplastic
Ingress protection to IP67 (unless stated otherwise)


Rated voltage: contact blocks; 500V, signal lamps; 240V
Rated current: contact blocks; 16A
M20 bottom cable entry complete with cable-gland

Gerelateerde Links