Schneider Electric TeSys D LC1D Contactor, 24 V dc Coil, 4-Pole, 40 A, 4NO, 690 V ac/dc

TeSys D Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The range has been designed for integration in control systems and can be used to create motor starters for any type of application. The TeSys D contactors offer quick simple setup while maintaining compliance with international standards.

• Built-in auxiliary contacts for added switching capability
• Screw connections: IP20 finger-safe terminals with both North American and International terminal markings
• Can be panel mounted with screws or DIN Rail mounted
• Bidirectional peak limiting diode suppressor to protect the coil
• Easily installed accessories
• Flexible control circuit to suit a wide range of applications

Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions.

• AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.


• AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running. Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.

• Auxiliary contact blocks with serrated wiping action
• Front mount dust tight auxiliary contact blocks
• Pneumatic time delay blocks
• Transient voltage surge suppressors
• Interface modules and electronic timers
• Mechanical latching blocks

Yes the Tesys D range uses linear translation movement that provides double breaking of the poles.

On the lookout for a reliable device to open and close circuits? Get this contactor from Schneider Electric in your sights. It's used to manage the flow of power in your electrical system and, thanks to a current rating of 40A, it can handle high-power applications without a hitch. The device delivers an operating rate of 3600 cycles per hour, so it withstands heavy usage without breaking a sweat. For extra strength, there's a protective cover that safeguards it against debris. You can mount the contactor on a DIN rail or a plate, making it a versatile piece of kit.

• IP20 rating means it's touch-proof and protected against tools and wires larger than 12mm
• Mechanical durability of 30 million cycles for long-lasting use
• Four poles for connection to multiple devices

• Light and thermal management systems
• Industrial power supplies
• Hobbyist workshops

This unit has compact dimensions of 91 (L) x 45 (W) x 107mm (D), so it's just what you need for use in areas with limited space.

LROS (Lloyds register of shipping), CSA, UL, GOST, DNV, CCC, GL, BV, RINA, UKCA.

CSA C22.2 No 14, EN 60947-4-1, EN 60947-5-1, IEC 60947-4-1, IEC 60947-5-1, UL 508, IEC 60335-1.