Schneider Electric LC1D Contactor, 230V ac Coil, 3-Pole, 115 A, 30 kW 240V, 3 NO, 1kV ac

RS-stocknr.:: 744-7138
Fabrikantnummer:: LC1D1156U7
Fabrikant:: Schneider Electric

Schneider Electric LC1D Contactor, 230V ac Coil, 3-Pole, 115 A, 30 kW 240V, 3 NO, 1kV ac

Momenteel niet beschikbaar

We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.

RS-stocknr.:: 744-7138
Fabrikantnummer:: LC1D1156U7
Fabrikant:: Schneider Electric

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Schneider Electric
	Product Type	Contactor
	Coil Voltage	230V ac
	Number of Poles	3
	Contact Voltage	1kV ac
	Contact Current	115A
	Series	LC1D
	Power Rating	30kW
	Mount Type	DIN Rail
	Function	Motor Control, Resistive Load
	Normal State Configuration	3 NO
	Number of Auxiliary Contacts	2
	Auxiliary Contact Configuration	1 NO/1 NC
	Terminal Type	Lug Ring
	Contactor Application	Motor Control, Resistive Load
	Control Circuit Voltage Uc	240V
	Minimum Operating Temperature	-40°C
	Operational Current Ie	115A
	Maximum Operating Temperature	60°C
	Standards/Approvals	EN 60947-4-1
	Length	158mm
	Width	120mm
	Depth	136mm
	Pole and Throw Configuration	3P

	Alles selecteren
	Merk Schneider Electric
	Product Type Contactor
	Coil Voltage 230V ac
	Number of Poles 3
	Contact Voltage 1kV ac
	Contact Current 115A
	Series LC1D
	Power Rating 30kW
	Mount Type DIN Rail
	Function Motor Control, Resistive Load
	Normal State Configuration 3 NO
	Number of Auxiliary Contacts 2
	Auxiliary Contact Configuration 1 NO/1 NC
	Terminal Type Lug Ring
	Contactor Application Motor Control, Resistive Load
	Control Circuit Voltage Uc 240V
	Minimum Operating Temperature -40°C
	Operational Current Ie 115A
	Maximum Operating Temperature 60°C
	Standards/Approvals EN 60947-4-1
	Length 158mm
	Width 120mm
	Depth 136mm
	Pole and Throw Configuration 3P

Schneider Electric LC1D TeSys D Contactors.

TeSys D Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The range has been designed for integration in control systems and can be used to create motor starters for any type of application. The TeSys D contactors offer quick simple setup while maintaining compliance with international standards.

Features and Benefits.

Built-in auxiliary contacts for added switching capability.

Screw connections: IP20 finger-safe terminals with both North American and International terminal markings.

Can be panel mounted with screws or DIN Rail mounted.

Bidirectional peak limiting diode suppressor to protect the coil.

Easily installed accessories.

Flexible control circuit to suit a wide range of applications.

What does the utilisation category AC1 and AC3 mean for the TeSys contactors?

Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions.

AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.

AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running. Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.

What accessories are available?

Auxiliary contact blocks with serrated wiping action.

Front mount dust tight auxiliary contact blocks.

Pneumatic time delay blocks.

Transient voltage surge suppressors.

Interface modules and electronic timers.

Mechanical latching blocks.

Is the TeSys D range a double break pole type contactor?

Yes, the Tesys D range uses linear translation movement that provides double breaking of the poles.