Onlangs gezocht

    Schneider Electric TeSys D LC1D Contactor, 230 V ac Coil, 3 Pole, 32 A, 15 kW, 3NO

    RS-stocknr.:
    394-9649
    Fabrikantnummer:
    LC1D32P7
    Fabrikant:
    Schneider Electric
    Schneider Electric
    Bekijk alle Contactors
    78 op voorraad - levertijd is 1 werkdag(en)
    Add to Basket
    Aantal stuks

    Toegevoegd

    Prijs Each

    115,71 €

    (excl. BTW)

    140,01 €

    (incl. BTW)

    Aantal stuksPer stuk
    1 +115,71 €
    RS-stocknr.:
    394-9649
    Fabrikantnummer:
    LC1D32P7
    Fabrikant:
    Schneider Electric

    N.v.t.

    Land van herkomst:
    FR

    Wetgeving en conformiteit

    N.v.t.

    Land van herkomst:
    FR

    Productomschrijving

    Schneider Electric LC1D TeSys D Contactors


    TeSys D Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The range has been designed for integration in control systems and can be used to create motor starters for any type of application. The TeSys D contactors offer quick simple setup while maintaining compliance with international standards.


    Features and Benefits


    • Built-in auxiliary contacts for added switching capability
    • Screw connections: IP20 finger-safe terminals with both North American and International terminal markings
    • Can be panel mounted with screws or DIN Rail mounted
    • Bidirectional peak limiting diode suppressor to protect the coil
    • Easily installed accessories
    • Flexible control circuit to suit a wide range of applications


    What does the utilisation category AC1 and AC3 mean for the TeSys contactors?


    Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions.

    • AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.

    • AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running. Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.


    What accessories are available?


    • Auxiliary contact blocks with serrated wiping action
    • Front mount dust tight auxiliary contact blocks
    • Pneumatic time delay blocks
    • Transient voltage surge suppressors
    • Interface modules and electronic timers
    • Mechanical latching blocks


    Is the TeSys D range a double break pole type contactor?


    Yes the Tesys D range uses linear translation movement that provides double breaking of the poles.


    Schneider Electric Contactor, 3 Poles, 230V AC Coil - TeSys D Series - LC1D32P7


    Features & Benefits


    • Screw terminals support quick and secure connections
    • Mechanical durability of 15m cycles for a long service life


    Applications


    • Bucket elevators
    • Squirrel-cage motors
    • Heating, ventilation and air-conditioning units


    What kind of contactor is this?


    This is a double-break pole-type contactor, which allows for the double breaking of the poles using linear translation movement. As it opens the circuit at two separate places, heat dissipates more quickly, enabling the switch to handle higher voltages as well as provide a longer service life than a single-break contactor.



    Specificaties

    KenmerkWaarde
    Coil Voltage230 V ac
    Number of Poles3
    Contact Current Rating32 A
    Power Rating15 kW
    Normal State Configuration3NO
    Contact Voltage Rating690 V ac
    RangeTeSys D
    SeriesLC1D
    Number Of Auxiliary Contacts2
    Terminal TypeScrew
    Width45mm
    Depth90mm
    Minimum Operating Temperature-40°C
    Maximum Operating Temperature+60°C
    Length85mm
    78 op voorraad - levertijd is 1 werkdag(en)
    Add to Basket
    Aantal stuks

    Toegevoegd

    Prijs Each

    115,71 €

    (excl. BTW)

    140,01 €

    (incl. BTW)

    Aantal stuksPer stuk
    1 +115,71 €