LM111JG Texas Instruments Comparator Open Collector, Open Drain O/P, 165 μs 15V 5 V 8-Pin CDIP
- RS-stocknr.:
- 796-7997P
- Fabrikantnummer:
- LM111JG
- Fabrikant:
- Texas Instruments
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal 10 eenheden (geleverd in een buis)*
€ 494,05
(excl. BTW)
€ 597,80
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Tijdelijk niet op voorraad
- Verzending 50 stuk(s) vanaf 24 september 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 10 - 18 | € 49,405 |
| 20 - 28 | € 48,455 |
| 30 - 38 | € 47,52 |
| 40 + | € 46,525 |
*prijsindicatie
- RS-stocknr.:
- 796-7997P
- Fabrikantnummer:
- LM111JG
- Fabrikant:
- Texas Instruments
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Texas Instruments | |
| Comparator Type | General Purpose | |
| Product Type | Comparator | |
| Mount Type | Through Hole | |
| Package Type | CDIP | |
| Output Type | Open Collector, Open Drain | |
| Number of Channels | 1 | |
| Typical Response Time | 165μs | |
| Pin Count | 8 | |
| Maximum Supply Voltage | 15V | |
| Minimum Supply Voltage | 5V | |
| Minimum Operating Temperature | -55°C | |
| Maximum Operating Temperature | 125°C | |
| Standards/Approvals | No | |
| Height | 5.08mm | |
| Length | 10.16mm | |
| Supply Current | -5mA | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Texas Instruments | ||
Comparator Type General Purpose | ||
Product Type Comparator | ||
Mount Type Through Hole | ||
Package Type CDIP | ||
Output Type Open Collector, Open Drain | ||
Number of Channels 1 | ||
Typical Response Time 165μs | ||
Pin Count 8 | ||
Maximum Supply Voltage 15V | ||
Minimum Supply Voltage 5V | ||
Minimum Operating Temperature -55°C | ||
Maximum Operating Temperature 125°C | ||
Standards/Approvals No | ||
Height 5.08mm | ||
Length 10.16mm | ||
Supply Current -5mA | ||
Automotive Standard No | ||
LMx11 family Single Comparators
The LM111, LM211 and LM311 from Texas Instruments are differential input voltage comparators with a wide operating voltage range and 200 ns response time. The inputs of these devices can be isolated from system ground and the uncommitted outputs can drive loads referred to either supply rail or ground. These single comparators are provided with balancing and strobe capability.
Comparators, Texas Instruments
Texas Instruments’ range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.
Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.