Analog Devices TruPwr ADL5511 RF Envelope, RMS Detector Evaluation Board 6GHz ADL5511-EVALZ

Bekijk deze categorie
Momenteel niet beschikbaar
We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.
RS-stocknr.:
785-8617
Fabrikantnummer:
ADL5511-EVALZ
Fabrikant:
Analog Devices
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Analog Devices

RF Technology

RF Envelope, RMS Detector

Kit Classification

Evaluation Board

Featured Device

ADL5511

Kit Name

TruPwr

Frequency

6GHz

Evaluation Board for ADL5511 DC to 6GHz Envelope and TruPwr RMS Detector


The ADL5511-EVALZ is a fully populated, 4-layer, FR4-based evaluation board. For normal operation, it requires a 5V/100mA power supply. The 5V power supply should be connected to the clip leads labeled VPOS and GND. The RF input signals are applied to an edge-mounted SMA type RF connector (RFIN). The envelope output signal is accessible via the SMA connector labeled VENV. The RMS output and envelope reference signals are accessible on the clip leads labeled VRMA and EREF. To access the RMS output and envelope reference output via SMA cables, SMA connectors can be soldered on to the pads labeled VRMS1 and EREF1.

ADL5511


Envelope tracking RF detector with output proportional to input voltage
Separate TruPwr rms output No balun or external tuning required
Excellent temperature stability
Input power dynamic range of 47dB
Input frequency range from dc to 6GHz
130MHz envelope bandwidth
Envelope delay: 2ns
Single-supply operation: 4.75V to 5.25V
Supply current: 21.5mA
Power-down mode: 130μW


RF & Microwave, Analog Devices