Microchip CAN Bus Monitor Development Kit MCP2515DM-BM
- RS-stocknr.:
- 698-8899
- Artikelnummer Distrelec:
- 173-88-900
- Fabrikantnummer:
- MCP2515DM-BM
- Fabrikant:
- Microchip
Subtotaal (1 eenheid)*
€ 136,03
(excl. BTW)
€ 164,60
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- Plus verzending 2 stuk(s) vanaf 16 december 2025
- Plus verzending 1 stuk(s) vanaf 03 februari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 136,03 |
*prijsindicatie
- RS-stocknr.:
- 698-8899
- Artikelnummer Distrelec:
- 173-88-900
- Fabrikantnummer:
- MCP2515DM-BM
- Fabrikant:
- Microchip
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Microchip | |
| Kit Classification | Development Kit | |
| Kit Name | CAN Bus Monitor | |
| Alles selecteren | ||
|---|---|---|
Merk Microchip | ||
Kit Classification Development Kit | ||
Kit Name CAN Bus Monitor | ||
CAN Bus Monitor Demonstration Board
Microchips MCP2515DM-BM demo board is a duo board kit that can create a CAN (Controller Area Network) bus. The two boards are identical and are connected with a CAN cable, while the other board is connected to the host PC. The software for this board can be used to send and receive CAN messages and configure the registers. The MCP2515 boars are both reversible meaning either one can take the others role, depending on how you have them connected.
Depending on the configuration of your cables, the board connected to your PC will become the monitor, and the other board will become the Traffic Generator.
Depending on the configuration of your cables, the board connected to your PC will become the monitor, and the other board will become the Traffic Generator.
Features and Benefits:
- PIC18F4550 PIC MCU with ICD2 interface for in-circuit programming
- Testing points for monitoring MCP2515 pins (CAN, SPI and status)
- Can be connected to an existing CAN bus
- Identical boards allow for neither to be a master board
- Button for changing the bus load on the Traffic Generator node
MCP2515 Firmware:
http://ww1.microchip.com/downloads/en/DeviceDoc/MCP2515DM-BM_Firmware.zip
MCP2515 PC Software:
http://ww1.microchip.com/downloads/en/DeviceDoc/BusMonitor_v2.0.0.22.zip
Whats in the box:
- 2x CAN Bus monitoring boards
- 1x Connector cable
- 1x USB A to USB B
- 1x Information sheet
Supplied with
CAN cable, CAN bus PC software.
CAN Bus Communication - Microchip
Gerelateerde Links
- Microchip PICTail Plus MCP2515 Development Kit MCP2515DM-PTPLS
- Seeed Studio OBD-II CAN Bus GPS Development Kit Development Kit for MCP2515 CAN, MCP2551 CAN
- MikroElektronika CAN Bus SN65HVD230 Evaluation Kit MIKROE-986
- Microchip, dsPIC33EV 5V CAN-LIN STARTER KIT Development Kit, dsPIC33EV256GM106 - DM330018
- Digilent Pmod CAN: CAN 2.0B Controller with Integrated Transceiver Development Kit 410-353
- MikroElektronika CAN SPI Click 5V Development Kit MIKROE-988
- Microchip Development Development Board Development Kit Development Board for ATA658x EV65U86A
- Microchip PICtail ENC28J60 Development Kit AC164121
