FTDI Chip UMFT234XD Breakout Modules UMFT234XD for USB UMFT234XD-NC

Bekijk deze categorie
Momenteel niet beschikbaar
We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.
RS-stocknr.:
216-8450
Fabrikantnummer:
UMFT234XD-NC
Fabrikant:
FTDI Chip
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

FTDI Chip

Classification

Module

For Use With

USB

Featured Device

UMFT234XD

Kit Name

UMFT234XD Breakout Modules

The FTDI Chip UMFT234XD is a breakout board that converts USB2.0 Full-Speed to UART. These modules do not have a USB connector, instead, the modules plug directly into the USB host connector and the pads of the PCB makes electrical contact with the electrical contacts of the USB connector. The UART interface operates at +3.3V voltage levels, however all I/Os are 5V tolerant.

USB to UART with four control bus lines, 33V power out limited to 50mA and 5V with as safety fuse
UART signals available via 8 pads on the PCB

Gerelateerde Links