Pycom Bluetooth Smart (BLE), SigFox, WiFi Development Board 868 MHz SiPy RCZ1 & RCZ3

Bekijk deze categorie
Momenteel niet beschikbaar
We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.
RS-stocknr.:
125-9533
Fabrikantnummer:
SiPy RCZ1 & RCZ3
Fabrikant:
Pycom
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Pycom

Kit Classification

Development Board

Product Type

Communication & Wireless Development Tool

RF Technology

Bluetooth Smart (BLE), SigFox, WiFi

Maximum Frequency

868MHz

Land van herkomst:
CN

Pycom SiPy MicroPython WiFi/Bluetooth/Sigfox Development Board


The SiPy is a MicroPython enabled WiFi, Bluetooth and Sigfox development board designed specifically for IoT applications. At its heart is the Espressif ESP32 System on Chip (SoC) featuring a dual-core microcontroller, WiFi, Bluetooth, Sigfox and 512 KB RAM. All this power packed into a board measuring just 55 x 20 x 3.5 mm!

Knowledge of Python on a PC or Mac transfers directly to working with MicroPython and SiPy so the learning curve is minimal. Pycom have developed an intuitive API to help you get the most out of your board.

NOTE: An external antenna is required for the SiPy and using without an antenna can damage the device. The Pycom Antenna Kit is recommended and available from RS 125-9535.

Two versions are available depending on your location:

SiPy RCZ1/RCZ3 Europe / Japan / Korea - RS 125-9533

SiPy RCZ2/RCZ4 America, Australia, New Zealand, SE Asia - RS 125-9540

Integrated SoC with a powerful CPU, Bluetooth (Classic and BLE) and WiFi

Up to 1 km WiFi range

Network processor handles the WiFi connectivity and the IPv6 stack leaving the main processor free to run your application

Texas Instruments CC1125 High performance RF transceiver

Internal WiFi and Bluetooth Antenna and U.FL connector for external Sigfox antenna

2 x UART, 2 x SPI, I2C, I2S, micro-SD card, 8 x 12-bit ADCs, Up to 24 GPIO

WS2812 RGB multi-colour LED

Reset and RF switches

Compatible with standard breadboards using headers (RS 102-9147). Pycom offer an expansion board (RS 125-9534) featuring a micro-USB connector, button, LED and battery connector.

ULP-coprocessor monitors GPIOs, ADC channels and internal peripherals during deep-sleep mode while only consuming 25 uA

Size: 55 x 20 x 3.5 mm

Operating temperature: -40°C to 85°C

Power


Input: 3.3 V to 5.5 V

WiFi: 12 mA in active mode, 5 uA standby

SiPy RCZ1/RCZ3 Europe / Japan / Korea: 17 mA in Rx mode, 47 in Tx mode and 0.5 uA in standby (RS 125-9533)

SiPy RCZ2/RCZ4 America, Australia, New Zealand, SE Asia: 24 mA in Rx mode, 257 mA in Tx mode and 0.5 uA in standby (RS 125-9540)

Sigfox Specifications


Maximum Tx power:

+14dBm (Europe)

+22dBm (America)

+22dBm (Australia and New Zealand)

Node range: Up to 50km

Sigfox pre-certified (October 2016)

Includes 12 months free subscription to the SIGFOX network. Following this we recommend taking out a subscription plan directly with Sigfox to suit your requirements. Please visit sigfox.com for more information.

WLAN (WiFi) - Pycom


Gerelateerde Links

Wees als eerste op de hoogte van onze nieuwste producten en aanbiedingen

E-mailadres

De persoonlijke gegevens die u aan ons verstrekt bij het aanmelden voor deze mailinglijst worden verwerkt in overeenstemming met ons privacybeleid.