RS PRO Clear Passivated, Zinc Steel Clinch Nut, M3

A clinch nut is usually installed into aluminium, steel or stainless-steel sheets and can also be known as a self-clinching nut or a flush nut. These nuts are easy to use and leave a flush finish with the sheet of metal. Self-clinching nuts are installed using a parallel squeezing force so access to both sides of the panel is needed.

Options include:

827-596 - self clinching nut, No.1 x M3

827-603 - self clinching nut, No.2 x M3

827-619 - self clinching nut, No.3 x M3

827-625 - self clinching nut, No.0 x M4

827-631 - self clinching nut, No.1 x M4

827-647 - self clinching nut, No.2 x M4

827-653 - self clinching nut, No.1 x M5

827-669 - self clinching nut, No.2 x M5

827-675 - self clinching nut, No.1 x M6

Case hardened mild steel, zinc plated and passivated to BS3382

Self-clinching nuts should be assembled using a press tool or similar non-shock device

Unsuitable for use with sheet materials having a hardness of more than 80Rb (150VPN)

White goods

Telecommunications

The automotive industry

Audio

Electrical

Enclosures

A clinch nut can be installed by being placed in a properly sized hole, then apply a parallel squeezing force to the head of the nut. After this action, the parenting material flows into the specially designed under head configuration which results in a load bearing and torque resistant joint.

RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality, which means you can be confident too.