RS PRO Clearance Gauge, 0.18 mm min, 0.5 mm max

Bekijk alle Clearance Gauges

Subtotaal (1 doos van 10 eenheden)*

€ 11,74

(excl. BTW)

€ 14,21

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 12 stuk(s) klaar voor verzending
  • 115 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Dozen
Per Doos
Per stuk*
1 +€ 11,74€ 1,174

*prijsindicatie

RS-stocknr.:
222-4472
Fabrikant:
RS PRO
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

RS PRO

Product Type

Clearance Gauge

Maximum Measurement

0.5 mm

Minimum Measurement

0.18 mm

Standards/Approvals

No

Vrijgesteld

Land van herkomst:
GB

RS PRO Clearance Gauge, 0.175 mm min, 0.5 mm max


Need to measure the clearance between fitted surfaces such as mains bearings, pipe flanges or housings? This plastic gauge from RS PRO is simple and effective to use. It's particularly useful in situations where a feeler gauge cannot be inserted.

The surfaces you want to measure between need to be separated and the gauge inserted. When the surfaces are returned to their usual position, they'll compress the plastic gauge, spreading it out over the surface. Once the gauge is removed, you can get your reading by measuring its width against the supplied calibration card. It can be used to measure clearances of between 0.175 mm and 0.5 mm.

The gauge is non-corrosive and soluble in oil, so any bits that get left behind won't harm your equipment. Gauges of this kind can be used to check for lobing and ovality in shafts. They're also commonly used to calibrate injection-moulding tools.

Features and Benefits


• Maximum measurement of 0.5 mm

• Minimum measurement of 0.175 mm

Gerelateerde Links