ITT CannonSize 16 Straight Circular Connector Backshell, For Use With Jacketed Cable, 36-Way
- RS-stocknr.:
- 265-9806
- Fabrikantnummer:
- TNA16CC-SE00L / 192993-0084
- Fabrikant:
- ITT Cannon
Afbeelding representeert productcategorie
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 38,61
(excl. BTW)
€ 46,72
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Tijdelijk niet op voorraad
- Verzending 351 stuk(s) vanaf 10 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 19 | € 38,61 |
| 20 - 39 | € 34,75 |
| 40 + | € 31,28 |
*prijsindicatie
- RS-stocknr.:
- 265-9806
- Fabrikantnummer:
- TNA16CC-SE00L / 192993-0084
- Fabrikant:
- ITT Cannon
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | ITT Cannon | |
| Product Type | Circular Connector Backshell | |
| For Use With | Jacketed Cable | |
| Shell Size | 16 | |
| Orientation | Straight | |
| Gender | Female | |
| Housing Material | Nylon | |
| Colour | Silver | |
| Length | 88.5mm | |
| IP Rating | IP67 | |
| Number of Contacts | 36 | |
| Strain Relief | No | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk ITT Cannon | ||
Product Type Circular Connector Backshell | ||
For Use With Jacketed Cable | ||
Shell Size 16 | ||
Orientation Straight | ||
Gender Female | ||
Housing Material Nylon | ||
Colour Silver | ||
Length 88.5mm | ||
IP Rating IP67 | ||
Number of Contacts 36 | ||
Strain Relief No | ||
Standards/Approvals No | ||
- Land van herkomst:
- HU
Shielded Backshell
Provides cable shielding termination
Internal braid is grounded to outer shell
Available in a standard or large cable exit
ITT TNM Shielded
The TNM connector range builds on the popular Trident and Neptune ranges from ITT Cannon. They feature full metal construction giving high reliability and durability.
RF shielding inherent in the full metal construction
Backshells enable cable braid termination so meeting EMC requirements
Signal versions have the same planform & contact arrangements as the QM range so upgrading and interchangeability can be achieved
Includes a rear rubber seal that enables IP67 rating to be maintained if only some contacts are used. The rubber seal can be discarded if a backshell is to be used. Both are rated to IP67
Cable, chassis and jam nut configurations available in standard and reversed formats
One, two or three part crimp contacts, also solder cup and PCB terminating contacts available for signal transfer. Power contacts are only required for power/signal connector types
Gerelateerde Links
- ITT Cannon, TNMSize 10 Straight Circular Connector Backshell, For Use With Jacketed Cable
- ITT CannonSize 14 mm Cable Clamp Strain Relief, For Use With jacketed Cables
- ITT Cannon, TNMSize 16 Straight Circular Connector Backshell, For Use With Unsealed Plug and Receptacles, 36-Way
- ITT CannonSize 16 Straight Circular Connector Backshell, For Use With Conduit
- ITT CannonSize 24 Straight Circular Connector Backshell, For Use With Conduit
- ITT Cannon, Trident TNMSize 14 Straight Circular Connector Backshell, For Use With Unsealed Plugs and Receptables,
- ITT Cannon, TNMSize 12 Straight Circular Connector Backshell, For Use With Unsealed Plugs and Receptables, 8-Way
- ITT Cannon, TNMSize 14 Straight Circular Connector Backshell, For Use With Unsealed Plug and Receptacles, 36-Way
