Schneider Electric 250V ac DIN Rail Circuit Trip for use with DIN Rail Mounting Support

Bekijk alle Circuit Trips

Subtotaal (1 eenheid)*

€ 56,33

(excl. BTW)

€ 68,16

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks
Per stuk
1 +€ 56,33

*prijsindicatie

RS-stocknr.:
219-9234
Fabrikantnummer:
A9E18074
Fabrikant:
Schneider Electric
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Schneider Electric

Range

Acti9

Current Rating

20A

Product Type

Circuit Trip

Series

Acti9 Control

For Use With

DIN Rail Mounting Support

Contact Configuration

2 CO

Mount Type

DIN Rail

Terminal Type

Staggered Tunnel Terminal

Standards/Approvals

IEC 60947-5-1, IEC 60669-1

Control Voltage

250V ac

Land van herkomst:
BE
The Schneider Electric Acti 9 iSSW is a linear switch used for the manual control of electric circuits. It is a 3 positions switch with 2 changeover contacts (2 C/O). The phase-separated wall can be divided to allow all the types of com busbar to pass through. It comes with staggered terminals to simplify connection. The tightening torque of connection is 1N.m for PZ1 screwdriver type. It complies with IEC 60669-1 and IEC 60947-5-1 standards.

The connection allows rigid copper cables from 0.5mm² minimum to 2x2.5mm² maximum

The connection allows flexible or with ferrule copper cables from 0.5mm² minimum to 2x2.5mm² maximum

The number of cycles open and close (O-C) is 30000

The width in 9mm pitc

Gerelateerde Links