Stainless Steel External Circlip, 6mm Shaft Diameter, 5.7mm Groove Diameter
- RS-stocknr.:
- 209-6609
- Fabrikant:
- RS PRO
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
300 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs 1 zak met 100
€ 14,21
(excl. BTW)
€ 17,19
(incl. BTW)
| Bag(s) | Per Zak | Per stuk* |
| 1 + | € 14,21 | € 0,142 |
| *prijsindicatie | ||
- RS-stocknr.:
- 209-6609
- Fabrikant:
- RS PRO
Wetgeving en conformiteit
- Land van herkomst:
- DE
Productomschrijving
RS PRO Stainless Steel External Circlip, 6 mm Shaft Diameter, 5.7 mm Groove Diameter
Looking to attach a mechanical part to a shaft? Turn to these external circlips from RS PRO. They hold parts firmly in place without interfering with their rotational force.
The retaining rings are easy to install and remove using RS PRO circlip pliers. They fit into a groove on the outside of the shaft, which keeps them secure against high rotational speeds. They're suitable for outdoor use as they're made of corrosion-resistant steel.
These units are supplied in a durable storage compartment box and come in packs of 100. There's also a handy layout sheet included that provides dimensional information. Retaining rings like these are often used in applications involving turning parts, including wind turbines, electric motors and roller bearings.
The retaining rings are easy to install and remove using RS PRO circlip pliers. They fit into a groove on the outside of the shaft, which keeps them secure against high rotational speeds. They're suitable for outdoor use as they're made of corrosion-resistant steel.
These units are supplied in a durable storage compartment box and come in packs of 100. There's also a handy layout sheet included that provides dimensional information. Retaining rings like these are often used in applications involving turning parts, including wind turbines, electric motors and roller bearings.
Features and Benefits
- External circlip type
- Fits groove diameters of 5.7 mm
- For shaft diameters of 6 mm
- Made of stainless steel
- Outside ring diameter of 11.7 mm
- Ring thickness of 0.7 mm
- Conforms to the dimensions specified in DIN 471 (BSC SF 14) and BS3673 standards
Specificaties
Kenmerk | Waarde |
|---|---|
| Circlip Type | External |
| For Shaft Diameter | 6mm |
| Fits Groove Diameter | 5.7mm |
| Ring Thickness | 0.7mm |
| Ring Outside Diameter | 11.7mm |
| Material | Stainless Steel |