Seeit SUPERPRO-610P Universal Programmer, Universal Programmer for EPROM, PLDs, ARM9 32 bit MCU, FLASH

Bekijk alle Chip Programmers

Subtotaal (1 eenheid)*

€ 1.188,36

(excl. BTW)

€ 1.437,92

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Tijdelijk niet op voorraad
  • Verzending vanaf 17 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 1.188,36

*prijsindicatie

RS-stocknr.:
798-4393
Fabrikantnummer:
SUPERPRO-610P
Fabrikant:
Seeit
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Seeit

Sub Type

Universal Programmer

Product Type

Universal Programmer

For Use With

EPROM, PLDs, ARM9 32 bit MCU, FLASH

Kit Contents

In-Circuit Debugger/Programmer, Cable

Programmer Name

SUPERPRO-610P

Interface Type

USB 2.0

Standards/Approvals

No

Land van herkomst:
CN

SUPERPRO 610P, High-Speed Universal Programmer, USB 2.0


The SuperPro-610P is an universal production programmer equipped with ARM9 processor with a USB 2.0 interface. Based on the 48-pin ZIF socket it can program over 32000 differents components among EPROMs, EEPROMs, FLASHs memories, PLDs and microcontrollers. It can program low voltage components down to 1.2V. It doesn’t need any adapters for any SDIP packages. The programming is extremely fast based on the use of algorithm technology downloaded in the CPU of the programmer during the selection of a device. An optional ISP adapter permit to program components soldered on printed circuits or devices in special packages. The software runs under Windows 98/ME/NT/2000/XP/Windows7/Windows8 (32/64 bits). Updates can be download freely.

Supported devices: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR & NAND), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller

Packages supported: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP, and more

Tests and Detects incorrect insertion of the device and defective pin

protected against short circuits and over-voltages

Computer interface with USB 2.0

AC Power Adapter: AC input 90V to 250V, 50/60Hz, DC output 12V/2A; power: 15W

Dimensions: 178 x 130 x 40 mm, Weight: 0.8kg

Kit Contents


Programmer with 48-pins ZIF socket

Power Adaptor 90-260Vac to 12Vdc

USB-B to USB-A cable

Software on CD-ROM

User manual in English and French

PC Based Programmers


Gerelateerde Links