SEGGER Flasher Portable PLUS, Development Kit for FLASH microcontrollers

Bekijk alle Chip Programmers

Subtotaal (1 eenheid)*

€ 1.621,70

(excl. BTW)

€ 1.962,26

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • Plus verzending 3 stuk(s) vanaf 08 december 2025
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 1.621,70

*prijsindicatie

RS-stocknr.:
136-7686
Fabrikantnummer:
5.16.02
Fabrikant:
SEGGER
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

SEGGER

Accessory Type

Development Kit

For Use With

FLASH microcontrollers

Programmer Name

Flasher Portable PLUS

Flasher Portable PLUS Programmer


Flasher Portable PLUS has been designed to fill the need for a portable, battery-operated production-grade Flash memory programmer used for in-field firmware updates. Initial setup/preparation for stand-alone mode operation is done via the J-Flash software. It supports storage of multiple configurations/image files, so one unit can be used for different targets. The Flasher Portable PLUS represents a significant upgrade to its predecessor, the Flasher Portable.

Supported Processors


• ARM 7/9/11

• ARM Cortex-A5/A7/A8/A9/A12/A15/A17

• ARM Cortex-M0/M0+/M1/M3/M4/M7

• ARM Cortex-R4/R5

• Freescale e200z0 (PowerPC)

• Renesas RX610/RX621/RX62G/RX62N/RX62T/RX630/RX631/RX63N/RX63T

Features


• Stand-alone in-circuit-programmer

• Powered by 680mAh rechargeable Li-Ion battery or USB

• Up to 10 hours programming with one battery charge

• Stores up to eight configurations/data files

• 1.8in LCD panel for display of programming status

• Pushbutton selects between stored images/configurations

• 128MB memory for configuration and data file storage

• Supports internal and external Flash devices

• Data files can be updated via mass storage or via J-Flash

• Host interface: USB 2.0

• Target interfaces: 20-pin JTAG/SWD/FINE/SPD

• Programming speed typically between 30KB/sec and 1MB/sec

• Max programming speed depends on target hardware and max programming speed of the Flash memory

• Authorized Flashing limits number of programming cycles and protects against non-authorized access

• Dimensions: 126 x 70 x 28mm

• Free software updates, 1 year of support

Supplied with

20-pin 0.1in target ribbon cable, USB cable

Gerelateerde Links