- RS-stocknr.:
- 525-155
- Fabrikant:
- RS PRO
6 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
66 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs 1 zak met 100
€ 10,90
(excl. BTW)
€ 13,19
(incl. BTW)
Bag(s) | Per Zak | Per stuk* |
1 + | € 10,90 | € 0,109 |
*prijsindicatie |
- RS-stocknr.:
- 525-155
- Fabrikant:
- RS PRO
Wetgeving en conformiteit
- Land van herkomst:
- GB
Productomschrijving
RS PRO Steel No. 10 Captive Nut
Use this RS PRO captive nut to fasten soft-metal sheeting, without the need to use additional threaded screws that could damage the finish of thin materials. A fastener like this one is commonly used to secure the rails of equipment racks.
The component's moisture-resistant zinc plating protects the inner metal, preventing it from rusting or tarnishing and ensuring a long product life. Its steel-spring cage also has a passivated coating that's chemical and corrosion-resistant for use in harsh settings. This screw is a convenient solution for mounting equipment in blind locations as you don't need a drill to fix it in place.
This versatile nut is suitable to use on a wide variety of panels ranging in thickness from 0.9 mm to 2 mm. You'll find fasteners like this one used in both industrial and electronic applications.
The component's moisture-resistant zinc plating protects the inner metal, preventing it from rusting or tarnishing and ensuring a long product life. Its steel-spring cage also has a passivated coating that's chemical and corrosion-resistant for use in harsh settings. This screw is a convenient solution for mounting equipment in blind locations as you don't need a drill to fix it in place.
This versatile nut is suitable to use on a wide variety of panels ranging in thickness from 0.9 mm to 2 mm. You'll find fasteners like this one used in both industrial and electronic applications.
Features and Benefits
- Dimensions of 12.7 (length) x 19.8 mm (width)
- Clear passivated, galvanised finish
- Suitable for a maximum panel thickness of 2 mm
- Suitable for a minimum panel thickness of 0.9 mm
- Steel material
- No. 10 thread size
Specificaties
Kenmerk | Waarde |
---|---|
Thread Size | No. 10 |
Dimensions | 12.7 x 19.8mm |
Material | Steel |
Finish | Clear Passivated, Galvanised |
For Panel Thickness Maximum | 2mm |
For Panel Thickness Minimum | 0.9mm |
Length | 12.7mm |
Width | 19.8mm |