Microchip, CAN Transceiver 8 Mbps, 8-Pin SOIC
- RS-stocknr.:
- 177-1954P
- Fabrikantnummer:
- MCP2542FD-H/SN
- Fabrikant:
- Microchip
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal 30 eenheden (geleverd in een buis)*
€ 27,69
(excl. BTW)
€ 33,51
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Op voorraad
- Plus verzending 600 stuk(s) vanaf 12 oktober 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 30 + | € 0,923 |
*prijsindicatie
- RS-stocknr.:
- 177-1954P
- Fabrikantnummer:
- MCP2542FD-H/SN
- Fabrikant:
- Microchip
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Microchip | |
| Maximum Data Rate | 8Mbps | |
| Product Type | CAN Transceiver | |
| Number of Transceivers | 1 | |
| Sub Type | CAN Transceiver | |
| Power Down Mode | Normal, Standby | |
| Supply Current | 70mA | |
| Mount Type | Surface | |
| Interface Type | CAN FD, CAN 2.0 | |
| Package Type | SOIC | |
| Pin Count | 8 | |
| Minimum Supply Voltage | 4.5V | |
| Maximum Supply Voltage | 5.5V | |
| ESD Protection | Yes | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Series | MCP2542FD | |
| Length | 4.9mm | |
| Height | 1.5mm | |
| Standards/Approvals | RoHS | |
| Width | 3.9mm | |
| Automotive Standard | AEC-Q100 | |
| Alles selecteren | ||
|---|---|---|
Merk Microchip | ||
Maximum Data Rate 8Mbps | ||
Product Type CAN Transceiver | ||
Number of Transceivers 1 | ||
Sub Type CAN Transceiver | ||
Power Down Mode Normal, Standby | ||
Supply Current 70mA | ||
Mount Type Surface | ||
Interface Type CAN FD, CAN 2.0 | ||
Package Type SOIC | ||
Pin Count 8 | ||
Minimum Supply Voltage 4.5V | ||
Maximum Supply Voltage 5.5V | ||
ESD Protection Yes | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Series MCP2542FD | ||
Length 4.9mm | ||
Height 1.5mm | ||
Standards/Approvals RoHS | ||
Width 3.9mm | ||
Automotive Standard AEC-Q100 | ||
- Land van herkomst:
- US
The MCP2542FD CAN transceiver is designed for high-speed CAN FD applications up to 8Mbps communication speed. The maximum propagation delay was improved to support longer bus length.The device meets the automotive requirements for CAN FD bit rates exceeding 2 Mbps, low quiescent current,electromagnetic compatibility (EMC) and electrostatic discharge (ESD).
Supports CAN 2.0 and CAN with Flexible Data Rate CAN FD) Physical Layer Transceiver Requirements
Optimized for CAN FD at 2, 5 and 8 Mbps Operation
Maximum propagation delay: 120 ns
Loop delay symmetry: ±10% (2 Mbps)
Wake-up on CAN activity, 3.6 μs filter time
Very Low Standby Current (4 μA, typical)
VIO Supply Pin to Interface Directly to CAN Controllers and Microcontrollers with 1.8V to 5V I/O
CAN Bus Pins are Disconnected when Device is Unpowered
An unpowered node or brown-out event will not load the CAN bus
Device is unpowered if VDD or VIO drop below its POR level
Detection of
Gerelateerde Links
- Pilz PNOZ X PNOZ X3 Emergency Stop Safety Relay, 24 V dc, 110V ac, Dual-Channel, 3 Safety Contacts
- RS PRO 4 Way Male 4 Pin Molex to 4 Way Female 4 Pin Molex Wire to Board Cable, 2m
- PR Electronics 4100 Series Universal Transmitter, Universal Input, Current, Voltage Output, 19.2 → 300 V dc,
- Festo Natural Round Plastic Tube x 4mm OD x 2.6mm ID x 1.4mm
- Siemens SIMATIC S7-1200 Series PLC CPU for Use with SIMATIC S7-1200 Series, Digital, Transistor Output, 14 (Digital, 2
- PR Electronics 4100 Series Universal Transmitter, Universal Input, Current, Voltage, Relay Output, 19.2 → 300 V
- Siemens LOGO! Series PLC CPU Starter Kit for Use with LOGO! V8.3, 115 V ac/dc, 230 V ac/dc Supply, Relay Output,
- Pilz PNOZ X PNOZ X1 Emergency Stop Safety Relay, 24V ac/dc, Single Channel, 3 Safety Contacts