Microchip, CAN Transceiver 8 Mbps, 8-Pin SOIC
- RS-stocknr.:
- 177-1623
- Fabrikantnummer:
- MCP2542FD-E/SN
- Fabrikant:
- Microchip
Subtotaal (1 tube van 100 eenheden)*
€ 93,30
(excl. BTW)
€ 112,90
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- 400 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per tube* |
|---|---|---|
| 100 + | € 0,933 | € 93,30 |
*prijsindicatie
- RS-stocknr.:
- 177-1623
- Fabrikantnummer:
- MCP2542FD-E/SN
- Fabrikant:
- Microchip
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Microchip | |
| Product Type | CAN Transceiver | |
| Maximum Data Rate | 8Mbps | |
| Number of Transceivers | 1 | |
| Sub Type | CAN Transceiver | |
| Power Down Mode | Standby, Normal | |
| Supply Current | 70mA | |
| Mount Type | Surface | |
| Package Type | SOIC | |
| Interface Type | ISO 11898-2, ISO 11898-5, CAN | |
| Pin Count | 8 | |
| Minimum Supply Voltage | 4.5V | |
| Maximum Supply Voltage | 5.5V | |
| ESD Protection | Yes | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Series | MCP2542FD | |
| Standards/Approvals | No | |
| Length | 4.9mm | |
| Height | 1.5mm | |
| Width | 3.9 mm | |
| Automotive Standard | AEC-Q100 | |
| Alles selecteren | ||
|---|---|---|
Merk Microchip | ||
Product Type CAN Transceiver | ||
Maximum Data Rate 8Mbps | ||
Number of Transceivers 1 | ||
Sub Type CAN Transceiver | ||
Power Down Mode Standby, Normal | ||
Supply Current 70mA | ||
Mount Type Surface | ||
Package Type SOIC | ||
Interface Type ISO 11898-2, ISO 11898-5, CAN | ||
Pin Count 8 | ||
Minimum Supply Voltage 4.5V | ||
Maximum Supply Voltage 5.5V | ||
ESD Protection Yes | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Series MCP2542FD | ||
Standards/Approvals No | ||
Length 4.9mm | ||
Height 1.5mm | ||
Width 3.9 mm | ||
Automotive Standard AEC-Q100 | ||
- Land van herkomst:
- US
The MCP2542FD CAN transceiver is designed for high-speed CAN FD applications up to 8Mbps communication speed. The maximum propagation delay was improved to support longer bus length.The device meets the automotive requirements for CAN FD bit rates exceeding 2 Mbps, low quiescent current,electromagnetic compatibility (EMC) and electrostatic discharge (ESD).
Supports CAN 2.0 and CAN with Flexible Data Rate CAN FD) Physical Layer Transceiver Requirements
Optimized for CAN FD at 2, 5 and 8 Mbps Operation
Maximum propagation delay: 120 ns
Loop delay symmetry: ±10% (2 Mbps)
Wake-up on CAN activity, 3.6 μs filter time
Very Low Standby Current (4 μA, typical)
VIO Supply Pin to Interface Directly to CAN Controllers and Microcontrollers with 1.8V to 5V I/O
CAN Bus Pins are Disconnected when Device is Unpowered
An unpowered node or brown-out event will not load the CAN bus
Device is unpowered if VDD or VIO drop below its POR level
Detection of
Gerelateerde Links
- Microchip MCP2542FD-E/SN, CAN Transceiver 8 Mbps, 8-Pin SOIC
- Microchip, CAN Transceiver 8 Mbps, 8-Pin SOIC
- Microchip MCP2542FD-H/SN, CAN Transceiver 8 Mbps, 8-Pin SOIC
- Microchip, CAN Transceiver 1 Mbps, 8-Pin SOIC
- Microchip MCP2561FD-E/SN, CAN Transceiver 8 Mbps, 8-Pin SOIC
- Microchip MCP2562FD-E/SN, CAN Transceiver 8 Mbps, 8-Pin SOIC
- Microchip MCP2562FDT-E/SN, CAN Transceiver 2 Mbps, 8-Pin SOIC
- Microchip MCP2562T-E/SN, CAN Transceiver 1 Mbps, 8-Pin SOIC