Microchip ATA6581-GTQW1-VAO, CAN Caps 1 Mbps, 18-Pin VDFN
- RS-stocknr.:
- 631-341
- Fabrikantnummer:
- ATA6581-GTQW1-VAO
- Fabrikant:
- Microchip
Subtotaal (1 rol van 6000 eenheden)*
€ 9.096,00
(excl. BTW)
€ 11.004,00
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Tijdelijk niet op voorraad
- Verzending vanaf 17 april 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per rol* |
|---|---|---|
| 6000 + | € 1,516 | € 9.096,00 |
*prijsindicatie
- RS-stocknr.:
- 631-341
- Fabrikantnummer:
- ATA6581-GTQW1-VAO
- Fabrikant:
- Microchip
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Microchip | |
| Maximum Data Rate | 1Mbps | |
| Product Type | CAN Caps | |
| Number of Transceivers | 1 | |
| Power Down Mode | Yes | |
| Supply Current | 150mA | |
| Interface Type | CAN | |
| Package Type | VDFN | |
| Pin Count | 18 | |
| Maximum Supply Voltage | 40V | |
| ESD Protection | Yes | |
| Maximum Operating Temperature | 150°C | |
| Width | 3 mm | |
| Standards/Approvals | OEM “Hardware Requirements for CAN Interfaces in Automotive Applications” Rev. 1.3, ISO 11898-2:2016, OEM “Requirements for Partial Networking” Rev. 2.2, IEC 61508, AEC-Q100, SAE J2602-2, SAE J2962-2, ISO 26262, SAE J2962-1, SAE J2284-1 to SAE J2284-5, ISO 17987-4 | |
| Series | ATA658x | |
| Automotive Standard | AEC-Q100 | |
| Alles selecteren | ||
|---|---|---|
Merk Microchip | ||
Maximum Data Rate 1Mbps | ||
Product Type CAN Caps | ||
Number of Transceivers 1 | ||
Power Down Mode Yes | ||
Supply Current 150mA | ||
Interface Type CAN | ||
Package Type VDFN | ||
Pin Count 18 | ||
Maximum Supply Voltage 40V | ||
ESD Protection Yes | ||
Maximum Operating Temperature 150°C | ||
Width 3 mm | ||
Standards/Approvals OEM “Hardware Requirements for CAN Interfaces in Automotive Applications” Rev. 1.3, ISO 11898-2:2016, OEM “Requirements for Partial Networking” Rev. 2.2, IEC 61508, AEC-Q100, SAE J2602-2, SAE J2962-2, ISO 26262, SAE J2962-1, SAE J2284-1 to SAE J2284-5, ISO 17987-4 | ||
Series ATA658x | ||
Automotive Standard AEC-Q100 | ||
- Land van herkomst:
- TH
The Microchip CAN-LIN System Basis Chip is a part of the ATA658x family which offers various combinations of LDOs, CAN Transceiver with or without partial networking and LIN Transceiver(s) in one package. The high speed (up to 5Mbit/s) ISO 11898-2: 2016 compliant CAN transceiver is designed for applications in the automotive industry, providing differential transmit and receive capability to (a microcontroller with) a CAN protocol controller.
Differential bus receiver with wide common mode range
Transmit data (TXD) dominant time out function
Autonomous bus biasing in accordance with ISO 11898 2:2016
RXD recessive clamping detection
The CAN transceiver disengages from the bus in over temperature and low power supply mode
Bus pins short circuit protected to GND and VCC
Gerelateerde Links
- Microchip ATA6580-GTQW1-VAO, CAN Caps 1 Mbps, 18-Pin VDFN
- Microchip ATA6571-GNQW1-VAO, CAN Caps 5 Mbps, 14-Pin SOIC
- Microchip MCP2517FDT-H/JHA, CAN Caps 8 Mbps, 14-Pin VDFN
- Microchip MCP2518FDT-H/QBB, CAN Caps 8 Mbps, 14-Pin VDFN
- Microchip, CAN Transceiver 8 Mbps, 8-Pin VDFN
- Microchip, CAN Controller 8 Mbps, 14-Pin VDFN
- Microchip ATA6500T-4CWVAO, CAN Transceiver 8 Mbps, 8-Pin VDFN
- Microchip ATA6505T-QBBVAO, CAN Transceiver 8 Mbps, 14-Pin VDFN