Nexperia 74HCT373D,653 Octal D Type Latch, 8-Bit Non-Inverting, 20-Pin SO
- RS-stocknr.:
- 170-4869
- Fabrikantnummer:
- 74HCT373D,653
- Fabrikant:
- Nexperia
Subtotaal (1 rol van 2000 eenheden)*
€ 814,00
(excl. BTW)
€ 984,00
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 05 januari 2027
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per rol* |
|---|---|---|
| 2000 + | € 0,407 | € 814,00 |
*prijsindicatie
- RS-stocknr.:
- 170-4869
- Fabrikantnummer:
- 74HCT373D,653
- Fabrikant:
- Nexperia
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Nexperia | |
| Logic Family | 74HCT | |
| Product Type | Octal D Type Latch | |
| Logic Function | D Type | |
| Number of Channels | 8 | |
| Polarity | Non-Inverting | |
| Mount Type | Surface | |
| Package Type | SO | |
| Minimum Supply Voltage | 4.5V | |
| Pin Count | 20 | |
| Maximum Supply Voltage | 5.5V | |
| Input Level | TTL | |
| Minimum Operating Temperature | -40°C | |
| Maximum Propagation Delay Time @ CL | 45ns | |
| Maximum Operating Temperature | 125°C | |
| Standards/Approvals | No | |
| Series | 74HCT | |
| Length | 13mm | |
| Height | 2.45mm | |
| Output Type | 3 State | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Nexperia | ||
Logic Family 74HCT | ||
Product Type Octal D Type Latch | ||
Logic Function D Type | ||
Number of Channels 8 | ||
Polarity Non-Inverting | ||
Mount Type Surface | ||
Package Type SO | ||
Minimum Supply Voltage 4.5V | ||
Pin Count 20 | ||
Maximum Supply Voltage 5.5V | ||
Input Level TTL | ||
Minimum Operating Temperature -40°C | ||
Maximum Propagation Delay Time @ CL 45ns | ||
Maximum Operating Temperature 125°C | ||
Standards/Approvals No | ||
Series 74HCT | ||
Length 13mm | ||
Height 2.45mm | ||
Output Type 3 State | ||
Automotive Standard No | ||
- Land van herkomst:
- CN
The 74HC373: 74HCT373 is an octal D-type transparent latch with 3-state outputs. The device features latch enable (LE) and output enable (OE) inputs. When LE is HIGH, data at the inputs enter the latches. In this condition the latches are transparent, a latch output will change each time its corresponding D-input changes. When LE is LOW the latches store the information that was present at the inputs a set-up time preceding the HIGH-to-LOW transition of LE. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the latches. Inputs include clamp diodes. This enables the use of current limiting resistors to Interface inputs to voltages in excess of VCC.
Low switch leakage
Gerelateerde Links
- Nexperia 74HCT373D,653 Octal D Type Latch, 8-Bit Non-Inverting, 20-Pin SO
- Nexperia 74HCT373D,652 D Type Latch, 8-Bit Non-Inverting, 20-Pin SO
- Nexperia 74HC245D,653 Bus Transceiver, 8-Bit Non-Inverting 3 State, 20-Pin SO
- Nexperia 8-Bit Octal D Type Latch, Transparent, 3 State, 20-Pin SO
- Nexperia 74HC573D,653 8-Bit Octal D Type Latch, Transparent, 3 State, 20-Pin SO
- Nexperia Buffer & Line Driver, 3 State, Non-Inverting, 20-Pin SO-16
- Nexperia 74LVC245AD,118 Bus Transceiver, 8-Bit Non-Inverting CMOS, CMOS TTL, TTL, 20-Pin SO
- Nexperia 74HC244D,653 Buffer & Line Driver, 3 State, Non-Inverting, 20-Pin SO-16