Vishay Bridge Rectifier, 1.2A, 125V, 4-Pin
- RS-stocknr.:
- 815-1165P
- Fabrikantnummer:
- B80C1000G-E4/51
- Fabrikant:
- Vishay
Bulkkorting beschikbaar
Subtotaal 250 eenheden (geleverd in een zak)*
€ 100,25
(excl. BTW)
€ 121,25
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- Plus verzending 275 stuk(s) vanaf 22 december 2025
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 250 - 600 | € 0,401 |
| 625 - 1225 | € 0,365 |
| 1250 - 2475 | € 0,271 |
| 2500 + | € 0,245 |
*prijsindicatie
- RS-stocknr.:
- 815-1165P
- Fabrikantnummer:
- B80C1000G-E4/51
- Fabrikant:
- Vishay
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Vishay | |
| Peak Average Forward Current | 1.2A | |
| Bridge Type | Single Phase | |
| Peak Reverse Repetitive Voltage | 125V | |
| Mounting Type | Through Hole | |
| Package Type | WOG | |
| Pin Count | 4 | |
| Configuration | Single | |
| Peak Non-Repetitive Forward Surge Current | 45A | |
| Maximum Operating Temperature | +125 °C | |
| Minimum Operating Temperature | -40 °C | |
| Peak Forward Voltage | 1V | |
| Peak Reverse Current | 10µA | |
| Length | 9.86mm | |
| Dimensions | 9.86 x 8.84 x 5.6mm | |
| Height | 5.6mm | |
| Width | 8.84mm | |
| Alles selecteren | ||
|---|---|---|
Merk Vishay | ||
Peak Average Forward Current 1.2A | ||
Bridge Type Single Phase | ||
Peak Reverse Repetitive Voltage 125V | ||
Mounting Type Through Hole | ||
Package Type WOG | ||
Pin Count 4 | ||
Configuration Single | ||
Peak Non-Repetitive Forward Surge Current 45A | ||
Maximum Operating Temperature +125 °C | ||
Minimum Operating Temperature -40 °C | ||
Peak Forward Voltage 1V | ||
Peak Reverse Current 10µA | ||
Length 9.86mm | ||
Dimensions 9.86 x 8.84 x 5.6mm | ||
Height 5.6mm | ||
Width 8.84mm | ||
- Land van herkomst:
- CN
Bridge Rectifiers with Wire Leads, B...C1000G Series, Vishay Semiconductor
Low forward voltage drop
High dielectric strength case
Wire Lead structure for Printed Circuit Board (PCB) through hole mounting
High dielectric strength case
Wire Lead structure for Printed Circuit Board (PCB) through hole mounting
Bridge Rectifiers - Vishay Semiconductor
The Bridge Rectifier converts an Alternating Current (AC) input into a Direct Current (DC) output for full-wave rectification applications. The diode arrangement provides the same polarity of output for either polarity of input. A three-phase full-wave rectifier is an arrangement of six diodes in a bridge circuit configuration. The packages are designed for minimal size, highest reliability and maximum thermal performance.