Onlangs gezocht

    Dold 3 Phase Brake Module, 2 kW, 7.5 kW, 400 V ac

    RS-stocknr.:
    806-5260
    Fabrikantnummer:
    BA9034N 10A AC50/60Hz 400V 2-11s
    Fabrikant:
    Dold
    Dold
    Bekijk alle Brake Modules
    7 op voorraad - levertijd is 1 werkdag(en)
    Add to Basket
    Aantal stuks

    Toegevoegd

    Prijs Each

    278,82 €

    (excl. BTW)

    337,37 €

    (incl. BTW)

    Aantal stuksPer stuk
    1 +278,82 €
    RS-stocknr.:
    806-5260
    Fabrikantnummer:
    BA9034N 10A AC50/60Hz 400V 2-11s
    Fabrikant:
    Dold
    Land van herkomst:
    DE

    Wetgeving en conformiteit

    Land van herkomst:
    DE

    Productomschrijving

    Dold Motor Brake Relay


    The BA9034N incorporates automatic standstill monitoring alongside a contactor connected to the DC relay output. Motor restart while DC braking current injection can be avoided thanks to an inter-lock contact & built in safety brake.
    Asynchronous motor brake relays are suitable for a variety of both single & three phase motors. A potentiometer allows for adjustment of the braking current scaled from 10-100%, accompanied by an integrated current limit which scales to the current % setting


    Features
    Suitable for both single & three phase asynchronous motors
    Automatic standstill detection
    Integrated braking contactor
    Easily fitted into existing installations as well as new applications
    Microcontroller enabled


    Benefits of the BA9034N
    Cost effective
    No need to monitor current
    Compact design
    High level of safety & more economic thanks to short stop cycles



    DC Brake Modules


    A powerbrake unit is used where fast, efficient and predictable stopping of a machine in the shortest possible time is required. Using the d.c. injection method, it provides a controlled deceleration to a stop, by injecting a d.c. current into two of the motor terminals and neutralising the rotating magnetic field in the motor after the 3 phase supply has been disconnected. This stops the motor coasting to a halt and reduces the delay time by this enforced braking. They can be used with a standard 3 phase induction motor. The unit may be located on a piece of machinery or adjacent to it, with little disruption or modification required to the existing wiring. The Powerbrake units provide a simple cost-effective solution to motor braking, which is maintenance and wear-free.,Brake Module - For a brake unit, all the control wiring has to be supplied and installed by the customer, including interlocked contactors and pushbuttons.,Production Brakes - Enclosed brakes with all control wiring included, optional DOL starter built in Injects DC on EVERY stop.,Critical Brake - Enclosed brake with contactors built in. Must be used with existing starter, also AC must pass through the unit so that it can be isolated before DC is injected. Only injects DC when E-stop activated.


    Specificaties

    KenmerkWaarde
    Phase3
    Starter IncludedYes
    Power Rating2 kW, 7.5 kW
    Supply Voltage400 V ac
    Enclosure Size45 x 73 x 122mm
    IP RatingIP20, IP40
    Enclosure Length45mm
    Enclosure Width73mm
    Enclosure Depth122mm
    Minimum Operating Temperature0°C
    Maximum Operating Temperature+45°C
    7 op voorraad - levertijd is 1 werkdag(en)
    Add to Basket
    Aantal stuks

    Toegevoegd

    Prijs Each

    278,82 €

    (excl. BTW)

    337,37 €

    (incl. BTW)

    Aantal stuksPer stuk
    1 +278,82 €