SKF Bearing Unit Insert 60 mm ID 75.64 mm OD SY 60 TF
- RS-stocknr.:
- 195-9622
- Fabrikantnummer:
- SY 60 TF
- Fabrikant:
- SKF
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 166,47
(excl. BTW)
€ 201,43
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Beperkte voorraad
- 7 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 166,47 |
| 5 - 9 | € 155,13 |
| 10 - 24 | € 151,91 |
| 25 + | € 148,67 |
*prijsindicatie
- RS-stocknr.:
- 195-9622
- Fabrikantnummer:
- SY 60 TF
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Inside Diameter | 60mm | |
| Product Type | Bearing Unit Insert | |
| Outside Diameter | 75.64mm | |
| Material | Cast Iron | |
| Static Load Rating | 36kN | |
| Dynamic Load Rating | 52.7kN | |
| Series | SY | |
| Standards/Approvals | No | |
| Overall Width | 240mm | |
| Bore Type | Round | |
| Limiting Speed | 3400rpm | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Inside Diameter 60mm | ||
Product Type Bearing Unit Insert | ||
Outside Diameter 75.64mm | ||
Material Cast Iron | ||
Static Load Rating 36kN | ||
Dynamic Load Rating 52.7kN | ||
Series SY | ||
Standards/Approvals No | ||
Overall Width 240mm | ||
Bore Type Round | ||
Limiting Speed 3400rpm | ||
Vrijgesteld
- Land van herkomst:
- IT
SKF Bearing Unit Insert, Pillow Block Housing Type, 2 Bolt Holes For Fasteners - SY 60 TF
Worried about shuddering in your industrial equipment? Choose this bearing unit insert from SKF and cut vibration out of the equation. It's made from cast iron, which provides high tensile strength for resistance against mechanical stress and corrosion. Thanks to a built-in grease fitting, relubrication is simple and you can give wear and tear the slip. As the unit is sealed to prevent dirt and debris from getting inside, you can depend on it for long-lasting performance. To get the insert up and running, simply screw it into place using the two predrilled bolt holes.
Features & Benefits
• Pillow block design supports bolted installation onto surfaces such as runners or structural support units
• 36,000N static and 52,700N dynamic load ratings, so suitable for heavy-duty applications
• 60mm inside diameter for use in compact equipment
Applications
• Centrifugal separators
• Cereal mills
• Industrial fans
What's the limiting speed of this device?
This device has a limiting speed of 3,400r/min, meaning it can support rapid rotation without generating damaging levels of heat.
Gerelateerde Links
- SKF Bearing Insert 60 mm ID 75.64 mm OD FY 60 TF/VA228
- SKF Bearing Insert 60 mm ID 75.64 mm OD FY 50 TF/VA201
- SKF Bearing Unit Insert 55 mm ID 69.06 mm OD SY 55 TF
- SKF Bearing Unit Insert 50 mm ID 83 mm OD TU 50 TF
- SKF Bearing Unit Insert 50 mm ID 62.51 mm OD SY 50 TR
- SKF Bearing Unit Insert 35 mm ID 51.1 mm OD SY 35 FM
- SKF SY 60 TF/VA228 Plummer Block House -, 60 mm ID
- SKF SY 45 TF Pillow Block Bearing -, 45 mm ID