INA Bearing Insert 12 mm ID 40 mm OD GRAE12-XL-NPP-B
- RS-stocknr.:
- 194-6887
- Fabrikantnummer:
- GRAE12-XL-NPP-B
- Fabrikant:
- INA
Afbeelding representeert productcategorie
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 27,14
(excl. BTW)
€ 32,84
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Tijdelijk niet op voorraad
- Verzending vanaf 15 april 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 27,14 |
| 5 - 9 | € 25,52 |
| 10 - 24 | € 25,03 |
| 25 + | € 24,48 |
*prijsindicatie
- RS-stocknr.:
- 194-6887
- Fabrikantnummer:
- GRAE12-XL-NPP-B
- Fabrikant:
- INA
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | INA | |
| Product Type | Bearing Insert | |
| Inside Diameter | 12 mm | |
| Outside Diameter | 40 mm | |
| Static Load Rating | 10.1kN | |
| Dynamic Load Rating | 4.75kN | |
| Overall Width | 28.6mm | |
| Series | GE | |
| Standards/Approvals | No | |
| Bore Type | Round | |
| Alles selecteren | ||
|---|---|---|
Merk INA | ||
Product Type Bearing Insert | ||
Inside Diameter 12 mm | ||
Outside Diameter 40 mm | ||
Static Load Rating 10.1kN | ||
Dynamic Load Rating 4.75kN | ||
Overall Width 28.6mm | ||
Series GE | ||
Standards/Approvals No | ||
Bore Type Round | ||
Radial insert ball bearings are ready-to-fit machine elements. In combination with drawn shafts, they are particularly easy to fit and suitable for the design of economical bearing arrangements. They are highly suitable where predominantly radial loads must be supported
Radial insert ball bearings with an extended inner ring undergo less tilting and therefore run more smoothly
Radial insert ball bearings with a spherical outer ring are highly suitable where: Static angular misalignments of the shaft must be compensated, which are caused by mounting inaccuracies and tolerances in the adjacent construction
Very good seals are required in environmental conditions such as dust, contamination, moisture, stone impacts and shocks
Radial insert ball bearings with a cylindrical outer ring are highly suitable where: A cylindrical housing bore is already present
The outer ring of the bearings is to be located by means of easy-to-fit snap rings
Radial insert ball bearings with a profiled bore are highly suitable where: shafts must transmit very high torques
Radial insert ball bearings with a rubber interliner are highly suitable where: Vibrations and shocks must be supported
Damping of running noise is required
Gerelateerde Links
- INA Bearing Insert 40 mm ID 80 mm OD GAY40-XL-NPP-B
- INA Bearing Insert 40 mm ID 80 mm OD GRAE40-XL-NPP-B
- INA Bearing Insert 17 mm ID 40 mm OD GRAE17-XL-NPP-B
- INA Bearing Insert 40 mm ID 80 mm OD RAE40-XL-NPP-B
- INA Bearing Insert 40 mm ID 80 mm OD 208-XL-NPP-B
- INA Bearing Unit Insert 15 mm ID 40 mm OD GRAE15-XL-NPP-B
- INA Bearing Insert 25 mm ID 52 mm OD GAY25-XL-NPP-B
- INA Bearing Insert 55 mm ID 100 mm OD GRAE55-XL-NPP-B