Moflash LED195 Series Amber Flashing Beacon 48V, LED Bulb Rear, Side, IP65

RS-stocknr.:: 122-6674
Fabrikantnummer:: LED195-05WH-01
Fabrikant:: Moflash

Moflash LED195 Series Amber Flashing Beacon 48V, LED Bulb Rear, Side, IP65

Subtotaal (1 eenheid)*

€ 88,19

(excl. BTW)

€ 106,71

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 75,00

Op voorraad

5 stuk(s) klaar voor verzending vanaf een andere locatie
Plus verzending 8 stuk(s) vanaf 23 maart 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 88,19

*prijsindicatie

RS-stocknr.:: 122-6674
Fabrikantnummer:: LED195-05WH-01
Fabrikant:: Moflash

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Moflash
	Product Type	Beacon
	Light Effect	Flashing
	Lens Colour	Amber
	Housing Material	ABS
	Bulb Type	LED
	Current Consumption	35 mA
	Mount Type	Rear, Side
	Current Type	AC/DC
	Base Diameter	104mm
	Terminal Type	Terminal Block
	Housing Colour	White
	Maximum Supply Voltage	48V
	Lamp Included	Yes
	Minimum Operating Temperature	-25°C
	Series	LED195
	Maximum Operating Temperature	55°C
	Height	73mm
	IP Rating	IP65
	Standards/Approvals	CE Certified

	Alles selecteren
	Merk Moflash
	Product Type Beacon
	Light Effect Flashing
	Lens Colour Amber
	Housing Material ABS
	Bulb Type LED
	Current Consumption 35 mA
	Mount Type Rear, Side
	Current Type AC/DC
	Base Diameter 104mm
	Terminal Type Terminal Block
	Housing Colour White
	Maximum Supply Voltage 48V
	Lamp Included Yes
	Minimum Operating Temperature -25°C
	Series LED195
	Maximum Operating Temperature 55°C
	Height 73mm
	IP Rating IP65
	Standards/Approvals CE Certified

Land van herkomst:: GB

Moflash Amber Multifunction LED Beacon, 85 to 280V AC, 40 to 380V DC - LED195 Series - LED195-05WH-01

Use this LED beacon from Moflash as a warning signal in your work environment. The amber-coloured lens signals a change in the surrounding environment that requires attention. Its LED lights are controlled via the PCB (printed circuit board) housed inside the plastic base. Flick the switch on the PCB to set the speed of the flash to a standard 60FPM (flashes per minute) or a more urgent 120FPM. You can also set it to a continuous mode for enhanced versatility.

Features & Benefits

• 120° light output above the vertical axis for broad visibility

• Wide operating temperature range of -25°C to +55°C for use in demanding environments

• Meets CE (Conformité Européenne) standards for European health and safety requirements

• IP65 (ingress protection) rating means it's protected against dust and low-pressure water jets

Applications

• Machine automation

• Road maintenance vehicles

• Factory equipment

Will this beacon's lens colour fade over time?

No, the PC (polycarbonate) lens is UV-stable to prevent its colour from fading in sunlight, meaning you can use this beacon in outdoor environments.