SKF 2204 E-2RS1TN9 Self Aligning Ball Bearing- Both Sides Sealed 20mm I.D, 47mm O.D

RS-stocknr.:: 505-726
Fabrikantnummer:: 2204 E-2RS1TN9
Fabrikant:: SKF

SKF 2204 E-2RS1TN9 Self Aligning Ball Bearing- Both Sides Sealed 20mm I.D, 47mm O.D

Bekijk deze categorie

Bulkkorting beschikbaar

Subtotaal (1 eenheid)**

€ 44,75

(excl. BTW)

€ 54,15

(incl. BTW)

12 op voorraad - levertijd is 1 werkdag(en).*

* Bezorgdata kunnen veranderen afhankelijk van de gekozen hoeveelheid en het bezorgadres.

GRATIS bezorging voor bestellingen vanaf 75,00 €

Aantal stuks	Per stuk
1 - 4	€ 44,75
5 - 9	€ 42,97
10 - 24	€ 42,08
25 +	€ 41,18

**prijsindicatie

RS-stocknr.:: 505-726
Fabrikantnummer:: 2204 E-2RS1TN9
Fabrikant:: SKF

Double Row Self - Aligning

Radial Self-Aligning Ball Bearing

These bearings are designed to accommodate shaft deflection when running and will also cope with initial misalignment. The double row bearing is designed primarily to withstand radial load with a small capacity for axial load. Also available with ring seals (rubbing seals) made from oil-resistant, non-wearing synthetic rubber with steel reinforcement on both sides (Type 2RS1).

Open Bearings

ETN9 and KTN9 are Open self-aligning bearings without a seal available in parallel or Taper bores.

Sealed bearings

2RS1TN9 are sealed (NBR) bearings packed with grease with a lithium thickener suitable for temperatures from -40°C to + 100°C. They are sealed for life, so should not be heated above 80°C before mounting and must not be washed out under any circumstances.

TN suffix denotes polyamide cage

Supplied with

instruction leaflet.

SKF Self Aligning Ball Bearing, 47mm Outside Diameter, 12.7 kN Dynamic Load Rating - 2204 E-2RS1TN9

This self-aligning ball bearing accommodates misalignment and ensures smooth operation under various conditions. Its design facilitates easy installation in applications requiring dependable performance, particularly in automation and mechanical systems. With features that support high load capacities, this product contributes to machinery efficiency and longevity.

Features & Benefits

• Design allows for misalignment correction
• Sealed on both sides to prevent contamination
• High static load rating supports challenging Applications
• Dynamic load rating ensures dependable motion
• Non-metallic cage material reduces weight
• Dual-row configuration enhances stability and performance

Applications

• Utilised in conveyor systems for consistent movement
• Applied in electric motors for enhanced efficiency
• Used in robotic arms for precise movements
• Suitable for agricultural machinery requiring high durability

How does the bearing handle misalignment?

The self-aligning design enables correction of minor misalignments during operation, enhancing performance.

What environments can it be used in?

It is suitable for environments where dust and moisture may be present, due to its sealed design.

Can it be used in high-speed applications?

Yes, it is designed to operate efficiently in high-speed applications due to its robust construction and low friction characteristics.

What materials are used in its construction?

This bearing is primarily constructed from steel, with a non-metallic cage that reduces weight while maintaining strength.

Kenmerk	Waarde
Inside Diameter	20mm
Outside Diameter	47mm
Race Width	18mm
Ball Bearing Type	Self Aligning Ball Bearing
Sealing Arrangement	Both Sides Sealed
Bearing Clearance	CN
Material	Steel
Ball Material	Steel
Cage Material	Non-metallic
Number of Rows	2
Static Load Rating	3.4kN
Dynamic Load Rating	12.7kN
Clearance Code	CN
Bore Type	Parallel
Bearing Series	2 Light
Model Number p	2204E
Race Type	Plain
Partial Bearing Code	2204