Arduino MKR ZERO (I2S Bus & SD for Sound, Music & Digital Audio Data)
- RS-stocknr.:
- 169-7584
- Artikelnummer Distrelec:
- 301-01-961
- Fabrikantnummer:
- ABX00012
- Fabrikant:
- Arduino
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 26,83
(excl. BTW)
€ 32,46
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- Plus verzending 42 stuk(s) vanaf 08 december 2025
- Plus verzending 210 stuk(s) vanaf 08 december 2025
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 9 | € 26,83 |
| 10 - 24 | € 26,37 |
| 25 + | € 25,95 |
*prijsindicatie
- RS-stocknr.:
- 169-7584
- Artikelnummer Distrelec:
- 301-01-961
- Fabrikantnummer:
- ABX00012
- Fabrikant:
- Arduino
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Arduino | |
| Product Name | MKR ZERO (I2S Bus & SD for Sound, Music & Digital Audio Data) | |
| Kit Classification | Development Board | |
| Processor Part Number | ATSAMD21G18A | |
| Alles selecteren | ||
|---|---|---|
Merk Arduino | ||
Product Name MKR ZERO (I2S Bus & SD for Sound, Music & Digital Audio Data) | ||
Kit Classification Development Board | ||
Processor Part Number ATSAMD21G18A | ||
- Land van herkomst:
- IT
Arduino MKR ZERO
Arduino MKR ZERO is a popular educational development board which contains the ATMEL SAMD21 microcontroller. It is made to integrate the core's low power consumption and high performance. Learn about 32-bit application development. It allows you to play with music files and no additional hardware is required.
What can you find on Arduino MKR ZERO board?
• Onboard SD connector with SPI interface
• Additional I2C Port - which apart from SDA and SCL signals includes the GND and +5V power rails
• Onboard LED - connected to a dedicated pin (32)
• Vin pin - used to power the board with regulated 5V source
• 5V - it outputs from the board when powered from the USB connector or from the VIN pin of the board
• VCC pin - outputs 3.3V through on-board regulator
• LED ON - connected to the 5V input from either USB or VIN
• Charge LED - driven by the charger chip that monitors the current drawn by the Li-Po battery while charging
Features and Benefits
• 5V board power supply
• Li-Po single cell, 3.7V, 700mAh minimum battery
• DC Current for 3.3V/5V - 600 mA
• Circuit operating voltage of 3.3V - unlike any other Arduino board, this runs at 3.3V, therefore any higher voltage than that will damage the board
• 22 digital pins
• Flash memory of 256 KB and 8 KB for bootloader
• 32 KB SRAM
• Full speed USB device and embedded Host
Arduino MKR ZERO is a popular educational development board which contains the ATMEL SAMD21 microcontroller. It is made to integrate the core's low power consumption and high performance. Learn about 32-bit application development. It allows you to play with music files and no additional hardware is required.
What can you find on Arduino MKR ZERO board?
• Onboard SD connector with SPI interface
• Additional I2C Port - which apart from SDA and SCL signals includes the GND and +5V power rails
• Onboard LED - connected to a dedicated pin (32)
• Vin pin - used to power the board with regulated 5V source
• 5V - it outputs from the board when powered from the USB connector or from the VIN pin of the board
• VCC pin - outputs 3.3V through on-board regulator
• LED ON - connected to the 5V input from either USB or VIN
• Charge LED - driven by the charger chip that monitors the current drawn by the Li-Po battery while charging
Features and Benefits
• 5V board power supply
• Li-Po single cell, 3.7V, 700mAh minimum battery
• DC Current for 3.3V/5V - 600 mA
• Circuit operating voltage of 3.3V - unlike any other Arduino board, this runs at 3.3V, therefore any higher voltage than that will damage the board
• 22 digital pins
• Flash memory of 256 KB and 8 KB for bootloader
• 32 KB SRAM
• Full speed USB device and embedded Host