- RS-stocknr.:
- 236-7995
- Fabrikantnummer:
- 14270
- Fabrikant:
- ITW Devcon
98 op voorraad - levertijd is 1 werkdag(en)
Totaalprijs (1 Aantal stuks)
€ 27,06
(excl. BTW)
€ 32,74
(incl. BTW)
Aantal stuks | Per stuk |
1 - 5 | € 27,06 |
6 - 14 | € 25,98 |
15 + | € 25,44 |
- RS-stocknr.:
- 236-7995
- Fabrikantnummer:
- 14270
- Fabrikant:
- ITW Devcon
- Land van herkomst:
- IE
Rapid Cure Epoxy Adhesive, 5 Minute ®
Fast curing clear epoxy adhesive
4 minute pot life
93°C maximum operating temperature
Works down to -40°C when cured
4 minute pot life
93°C maximum operating temperature
Works down to -40°C when cured
ITW Devcon Epoxy Resin
The ITW Devcon 50ml epoxy resin is a 2-part structural compound and dispensing systems which allow the metering, mixing and accurate application of epoxy and acrylic structural adhesives. They ensure accurate ratio mix, fast application with a predetermined flow rate and reduced waste/mess. To apply this adhesive, a system of a 1:1 ratio cartridge (in 3 sizes) application gun and static mixing nozzle is required
each is available separately.
Features and Benefits
• 100% reactive, no solvents
• Good dielectric strength
• Good solvent resistance
•
Fast curing clear epoxy adhesive
• Pot life is 4 minutes
• Setting time is 3 minutes to 6 minutes
• Cure time is 12 hours
• Shear strength of 13MPa
• The operating temperature ranges between -40°C and 93°C
• Good dielectric strength
• Good solvent resistance
•
Fast curing clear epoxy adhesive
• Pot life is 4 minutes
• Setting time is 3 minutes to 6 minutes
• Cure time is 12 hours
• Shear strength of 13MPa
• The operating temperature ranges between -40°C and 93°C
Applications
•
Ceramic
• Concrete
• Ferrite
• Ferrous metal
• Non-ferrous metal
• Glass
• Wood
Ceramic
• Concrete
• Ferrite
• Ferrous metal
• Non-ferrous metal
• Glass
• Wood
ITW Devcon Structural Adhesives
Two-part structural adhesives and dispensing systems which allows the metering, mixing and accurate application of epoxy and acrylic structural adhesives. They ensure accurate ratio mix, fast application with a predetermined flow rate and reduced waste/mess. To apply the adhesive a system of a 1:1 ratio cartridge (in 3 sizes) application gun and static mixing nozzle is required; each is available separately.
Kenmerk | Waarde |
---|---|
Adhesive Type | Epoxy Adhesive |
Trade Name | 5 Minute Epoxy |
Application | Bonding |
Material Compatibility | Ceramic, Concrete, Fabric, Glass, Metal, Wood |
Colour | Transparent |
Product Form | Paste |
Package Type | Dual Cartridge |
Package Size | 50 ml |
Cure Time | 45 → 60 min |
Shear Strength | 13 MPa |
Maximum Operating Temperature | +93°C |
Minimum Operating Temperature | -40°C |
Setting Time | 3 → 6min |
Operating Temperature Range | -40 → +93 °C |
- RS-stocknr.:
- 236-7995
- Fabrikantnummer:
- 14270
- Fabrikant:
- ITW Devcon
- Land van herkomst:
- IE
Rapid Cure Epoxy Adhesive, 5 Minute ®
Fast curing clear epoxy adhesive
4 minute pot life
93°C maximum operating temperature
Works down to -40°C when cured
4 minute pot life
93°C maximum operating temperature
Works down to -40°C when cured
ITW Devcon Epoxy Resin
The ITW Devcon 50ml epoxy resin is a 2-part structural compound and dispensing systems which allow the metering, mixing and accurate application of epoxy and acrylic structural adhesives. They ensure accurate ratio mix, fast application with a predetermined flow rate and reduced waste/mess. To apply this adhesive, a system of a 1:1 ratio cartridge (in 3 sizes) application gun and static mixing nozzle is required
each is available separately.
Features and Benefits
• 100% reactive, no solvents
• Good dielectric strength
• Good solvent resistance
•
Fast curing clear epoxy adhesive
• Pot life is 4 minutes
• Setting time is 3 minutes to 6 minutes
• Cure time is 12 hours
• Shear strength of 13MPa
• The operating temperature ranges between -40°C and 93°C
• Good dielectric strength
• Good solvent resistance
•
Fast curing clear epoxy adhesive
• Pot life is 4 minutes
• Setting time is 3 minutes to 6 minutes
• Cure time is 12 hours
• Shear strength of 13MPa
• The operating temperature ranges between -40°C and 93°C
Applications
•
Ceramic
• Concrete
• Ferrite
• Ferrous metal
• Non-ferrous metal
• Glass
• Wood
Ceramic
• Concrete
• Ferrite
• Ferrous metal
• Non-ferrous metal
• Glass
• Wood
ITW Devcon Structural Adhesives
Two-part structural adhesives and dispensing systems which allows the metering, mixing and accurate application of epoxy and acrylic structural adhesives. They ensure accurate ratio mix, fast application with a predetermined flow rate and reduced waste/mess. To apply the adhesive a system of a 1:1 ratio cartridge (in 3 sizes) application gun and static mixing nozzle is required; each is available separately.
Kenmerk | Waarde |
---|---|
Adhesive Type | Epoxy Adhesive |
Trade Name | 5 Minute Epoxy |
Application | Bonding |
Material Compatibility | Ceramic, Concrete, Fabric, Glass, Metal, Wood |
Colour | Transparent |
Product Form | Paste |
Package Type | Dual Cartridge |
Package Size | 50 ml |
Cure Time | 45 → 60 min |
Shear Strength | 13 MPa |
Maximum Operating Temperature | +93°C |
Minimum Operating Temperature | -40°C |
Setting Time | 3 → 6min |
Operating Temperature Range | -40 → +93 °C |