Power Integrations, AC/DC Converter 1.2 A, 5 V, 6 V 7-Pin, DIP LNK626PG

Bulkkorting beschikbaar

Subtotaal (1 verpakking van 5 eenheden)*

€ 5,05

(excl. BTW)

€ 6,10

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 20 stuk(s) klaar voor verzending
  • 2.165 stuk(s) klaar voor verzending vanaf een andere locatie
  • Plus verzending 2.420 stuk(s) vanaf 29 december 2025
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
Per verpakking*
5 - 10€ 1,01€ 5,05
15 +€ 0,746€ 3,73

*prijsindicatie

RS-stocknr.:
123-5471
Fabrikantnummer:
LNK626PG
Fabrikant:
Power Integrations
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Power Integrations

Product Type

AC/DC Converter

Maximum Input Voltage

265V ac

Maximum Output Voltage

5V

Mount Type

Through Hole

Output Power

17W

Switching Frequency

100kHz

Pin Count

7

Maximum Output Current

1.2A

Package Type

DIP

Minimum Input Voltage

85V ac

Topology

Flyback

Maximum Duty Cycle

54%

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

150°C

Standards/Approvals

No

Height

3.68mm

Series

LinkSwitch-CV

Width

6.6 mm

Length

9.83mm

Minimum Output Voltage

6V

Supply Current

600μA

Automotive Standard

No

Minimum Output Current

419mA

LinkSwitch-CV series Offline AC-DC Converters


Power Integrations LinkSwitch-CV family of energy-efficient, off-line switching AC-DC converters with accurate primary-side constant-voltage (CV) control. The LinkSwitch-CV series can significantly simplify the design of low power CV converters and eliminate the need for both an opto-coupler and secondary CV control circuitry while still providing excellent output voltage regulation. These highly integrated devices incorporate a 725V power MOSFET with on/off control state machine, self-biasing, frequency jittering, cycle-by-cycle current limit, and hysteretic thermal shutdown circuitry.

• Elimination of opto-coupler and all secondary CV control circuitry

• IC is self-biasing – no bias winding supply required

• Compensation for external component temperature variations

• Continuous and/or discontinuous mode operation for design flexibility

• Frequency jittering greatly reduces EMI filter cost

• Auto-restart protection reduces delivered power by >95% for output short-circuit and all control loop faults (open and shorted components)

• Hysteretic thermal shutdown with automatic recovery

• Meets HV creepage requirements between Drain and all other pins

• No primary or secondary current sense resistors

• No-load consumption <200 mW at 230 VAC and <70 mW with optional external bias

• Easily meets all global energy efficiency regulations with no added components

• ON/OFF control provides constant efficiency down to very light loads – Ideal for mandatory EISA and ENERGY STAR 2.0 regulations

AC-DC Converters, Power Integrations


Gerelateerde Links