Dremel DSM500 Silicon Carbide, 77 mm x 2 mm Thick

RS-stocknr.:: 212-1277
Fabrikantnummer:: 2615S500JB
Fabrikant:: Dremel

Dremel DSM500 Silicon Carbide, 77 mm x 2 mm Thick

Subtotaal (1 eenheid)*

€ 26,90

(excl. BTW)

€ 32,55

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Op voorraad

Plus verzending 10 stuk(s) vanaf 27 april 2026
Plus verzending 19 stuk(s) vanaf 27 april 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 26,90

*prijsindicatie

RS-stocknr.:: 212-1277
Fabrikantnummer:: 2615S500JB
Fabrikant:: Dremel

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Dremel
	Disc Diameter	77mm
	Product Type	Cutting Disc
	Thickness	2mm
	Abrasive Material	Silicon Carbide
	Bore Size	11.1mm
	Standards/Approvals	No
	Series	DSM500
	Material Cut	Plasterboard, Plexiglass, Laminated, Plastic, Fibreboard, Wood, Vinyl

	Alles selecteren
	Merk Dremel
	Disc Diameter 77mm
	Product Type Cutting Disc
	Thickness 2mm
	Abrasive Material Silicon Carbide
	Bore Size 11.1mm
	Standards/Approvals No
	Series DSM500
	Material Cut Plasterboard, Plexiglass, Laminated, Plastic, Fibreboard, Wood, Vinyl

Datasheet - 2615S500JB

N.v.t.

Land van herkomst:: CH

Dremel Cutting Disc, Carbide Material, For Use With DSM20 Mini Saws - DSM500 Series - 2615S500JB

Shape workpieces to your liking with this cutting disc from Dremel. It features a 1mm-thick abrasive surface made of carbide grit. This material has a very hard grain that cuts smoothly and resists wear, heat and snagging without breaking a sweat. As a result, it's a tough all-rounder you can count on for straight and plunge cuts in soft materials such as wood, vinyl and plastic. Once paired with a suitable mini saw, it rotates at speeds up to 20,000rpm, letting you cut to razor-sharp precision.

Features & Benefits

• Small disc diameter of 77mm makes it a good fit for exact cutting, reducing material waste

• Easy to attach without expert knowledge or additional tools, so you can get straight to work

• Multipurpose use to save you from having to swap out discs between jobs

Applications

• DIY jobs

• Plastic fabrication

• Machine building

• Woodworking workshops

What do I do when the disc starts to show wear?

To ensure consistently good results, you should replace this disc immediately once it starts to get worn down. It's best not to sharpen or file it down, as this can lead to uneven edges and irregular cuts.