Duracell Duracell Plus Power Alkaline AA Battery 1.5 V

Momenteel niet beschikbaar
We weten niet of dit artikel weer voorradig zal zijn, het wordt door de fabrikant stopgezet.

Alternatief

Dit product is momenteel niet beschikbaar. Hierbij onze aanbeveling voor een alternatief product.

Per stuk (in een verpakking 20)

€ 10,92

(excl. BTW)

€ 13,21

(incl. BTW)

RS-stocknr.:
211-8745
Fabrikantnummer:
AA +/PWR P4 RS
Fabrikant:
Duracell
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Duracell

Product Type

AA Battery

Series

Duracell Plus Power

Chemistry

Alkaline

Nominal Voltage

1.5V

Battery Capacity

3.016Ah

Battery Size

AA

IEC Code

LR6

Number of Batteries

4

Termination Type

Flat

Diameter

14.50mm

Standards/Approvals

ANSI, IEC

Height

50.5mm

Weight

25g

N.v.t.

Duracell Plus Power Series AA Battery, 1.5V Nominal Voltage, 14.5mm Diameter - AA +/PWR P4 RS


This AA battery provides a Compact source of 1.5V power for a wide range of portable electronics. It uses an alkaline chemistry designed to deliver usable capacity across varied discharge conditions and temperatures. The cell is IEC/ANSI-designated and supplied as a four-unit pack for routine replacement needs in consumer and professional devices.

Features and Benefits:


• 65m-ohm impedance for stable current delivery under load
• Operates between -20°C and 54°C for varied environments
• Flat terminals for predictable contact and device compatibility
• Typical mass 25g reduces transport and handling weight
• Nominal 1.5V output supports standard electronic circuits

Applications


• Suitable for handheld measurement instruments
• Used with battery-powered toys and remotes
• Ideal for portable lighting and LED devices
• Used for low-to-medium drain medical gadgets
• Can be used in wireless peripherals and sensors

What storage conditions extend shelf life?


Store cells at 6°C to 29°C to limit self-discharge and preserve delivered capacity.

How does output vary with load?


Delivered capacity depends on applied load and cut-off voltage, with discharge curves showing service hours differing by current draw.

What physical Interface does the cell provide?


The cell presents flat terminations and a cylindrical form to match LR6-compatible holders.

What impedance should designers expect for circuit planning?


Use approximately 65m-ohm at 1kHz for internal resistance considerations.

What are the dimensional references for equipment fitting?


Use a height of 50.5mm and diameter of 14.5mm when designing battery compartments.

Gerelateerde Links

Wees als eerste op de hoogte van onze nieuwste producten en aanbiedingen

E-mailadres

De persoonlijke gegevens die u aan ons verstrekt bij het aanmelden voor deze mailinglijst worden verwerkt in overeenstemming met ons privacybeleid.