Ultimaker 2 Go 3D Printer
- RS-stocknr.:
- 880-6755
- Fabrikantnummer:
- 9610
- Fabrikant:
- Ultimaker
Bekijk alle 3D Printers
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Alternatieven
Dit product is momenteel niet beschikbaar. Hierbij onze aanbeveling voor mogelijke alternatieven.
- RS-stocknr.:
- 880-6755
- Fabrikantnummer:
- 9610
- Fabrikant:
- Ultimaker
Wetgeving en conformiteit
- Land van herkomst:
- NL
Productomschrijving
Ultimaker 2 Go 3D Printer
The Ultimaker 2 Go is incredibly lightweight and designed for life on the move, yet has all the accuracy and reliability. Its intuitive software prepares everything for print in no time. And thanks to its size the Ultimaker 2 Go prints fast too. We have also designed a special travel case to make it easy to carry
Layer Resolution: up to 20 microns (0.02mm)
Position Precision: X & Y 12.5 microns, Z 5 microns
Print Speed: 30 - 300 mm/s
Travel Speed: 30 - 350 mm/s
Nozzle Diameter: 0.4 mm
Supported filaments: PLA, ABS, CPE
Position Precision: X & Y 12.5 microns, Z 5 microns
Print Speed: 30 - 300 mm/s
Travel Speed: 30 - 350 mm/s
Nozzle Diameter: 0.4 mm
Supported filaments: PLA, ABS, CPE
Don’t let its size fool you. Its lightweight print head is cooled by dual fans so bridging and overhangs are effortless. It’s fast. And with an accuracy of 20 microns, prints are nice and smooth too. So whether you’re new to 3D printing, or a seasoned pro, you can print more, in more places, with less fuss.
Note
Basic technical competency is recommended for set up, use and on-going maintenance of this 3D printer throughout it's lifetime
Do not leave your 3D Printer to print unattended. Any damage caused by unattended usage will void the warranty
Do not leave your 3D Printer to print unattended. Any damage caused by unattended usage will void the warranty
Supplied with
Ultimaker 2 Go 3D printer, Power supply, cable and UK plug, One roll of Ultimaker filament (0.75kg)
Spool holder and filament guide, USB cable, SD card, Test print carried out on the machine
Hot End Spare Parts Pack: nozzle, heater block, PTFE coupler, hot end isolator, sprint set screw
Glue stick, Blue Build Plate Tape, Hex wrenches,Grease, User manual
Spool holder and filament guide, USB cable, SD card, Test print carried out on the machine
Hot End Spare Parts Pack: nozzle, heater block, PTFE coupler, hot end isolator, sprint set screw
Glue stick, Blue Build Plate Tape, Hex wrenches,Grease, User manual
Warning
3D Printers should not be left to print unattended.
Specificaties
| Kenmerk | Waarde |
| Technology | FDM |
| Build Volume | 120 x 120 x 115mm |
| Number of Heads | 1 |
| Multi Material Printing | Yes |
| Dimensions L x W x H | 258 x 250 x 287.5mm |
| Filament Diameter | 2.85mm |
| Connectivity | SD Card, USB |
| Model | Ultimaker 2 Go |
| Plug Type | Type C - European Plug, Type G - British 3-Pin |
| Minimum Layer Height | 0.02mm |
| Weight | 6.2kg |
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Alternatieven
Dit product is momenteel niet beschikbaar. Hierbij onze aanbeveling voor mogelijke alternatieven.