RS PRO 1.9mm Pitch Spring Test Probe With Needle Tip, 3A

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: SG
Productomschrijving

RS Pro Spring Probe with Needle Point Head

Brought to you under the trusted RS Pro Brand, this flat head spring spade terminal probe is designed to be used with an appropriate receptacle, which is ordered separately. Having the probe separate from the receptacle allows easy replacement of damaged spring test probes without disturbing the wiring.

The probe is suited ideally (in development and production) for automatic test equipment (ATE) and test jigs, where fast testing of multipoint PCBs and sub-assemblies is required. Receptacles can be push fitted into the mounting plate to provide an airtight seal without the use of adhesives.

The needle head is ideal for test lands, pads, leads and holes. Penetrates oxides and fluxes as well as contaminated boards.

Features and Benefits

• Contact Resistance of 50mΩ
• Current Rating of 3A
• Gold Plated
• Spring Pressure of 1.47 N(g)

Specificaties
Kenmerk Waarde
Pitch 1.9mm
Length 16.35mm
Body Material Phosphor Bronze
Current Rating 3A
Contact Resistance 30mΩ
Probe Tip Type Needle
150 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
980 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
2,88
(excl. BTW)
3,48
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 20
2,88 €
14,40 €
25 - 45
2,662 €
13,31 €
50 - 95
2,448 €
12,24 €
100 +
2,23 €
11,15 €
*prijsindicatie
Related Products
Spring loaded stainless steel needle point probe which ...
Description:
Spring loaded stainless steel needle point probe which reacts resiliently under light pressure. Especially suited to sensitive printed circuits.
Rigid probes with finger guard and a rear ...
Description:
Rigid probes with finger guard and a rear socket receptacle that can accept 4mm shrouded plugs and leads.,The probes have anti-roll bodies and safety caps (removable) to give non-slip contact with IC legs.,Rated 1000V CAT III.
Rigid, long reach probe that accepts 4mm shrouded ...
Description:
Rigid, long reach probe that accepts 4mm shrouded plugsTip includes a 4mm Multilam® plug to mate with any 4mm socketTip has removable safety cap for non slip contact with IC legsFinger guard has an anti-roll chamferRated at 1000V CAT III ...
A range of accessories for use with OM ...
Description:
A range of accessories for use with OM 16 micro-ohmmeter. Mounted on metallic rod with handle5 m cord and locking socket adapted to the OM 16 micro-ohmmeterMeasurement is taken by pressing a point (voltage reading) mounted on a spring. This ...