NX Input Module, 8 Inputs, 2 Outputs, 24 V dc

  • RS-stocknr. 862-5755
  • Fabrikantnummer NX-SID800
  • Fabrikant Omron
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

Omron NX Standalone Safety Controller

The NX series safety control units offer simple and flexible design for high-speed, high-precision motion control and safety control in an integrated engineering environment when used in conjunction with the NJ series machine automation controller and the automation software Sysmac Studio. This functionality contributes to productivity improvements and assurance of safety conforming to international standards and rules.

Integrated safety into machine automation possible by connecting with the NX-series EtherCAT Coupler
The Safety CPU Unit controls up to 128 Safety I/O Units
4 or 8 points per Safety Input Unit, the 4-point Safety Input Unit can be directly connected with OMRON Non-contact Switches and Single beam Sensors
2 or 4 points per Safety Output Unit, the 2-point Safety Output Unit is characterized by large output breaking current of 2.0 A
The Safety Units can be freely allocated in any combination with standard NX I/O
Compliant with IEC61131-3
Safety programs can be standardized and reused efficiently by using POUs for design and operation
EN ISO13849-1 (PLe/Safety Category4), IEC 61508 (SIL3) certified
One connection using Safety over EtherCAT (FSoE) protocol enables flexible configuration by mixing the Safety Units with standard NX I/O
Hardware and safety circuits can be configured using the Sysmac Studio (Ver. 1.07)

Specificaties
Kenmerk Waarde
Series NX
Type Input Module
For Use With NX Control Unit
Supply Voltage 24 V dc
Number of Inputs 8
Number of Outputs 2
Power Rating 0.75 W
Mounting Style DIN Rail
Terminal Type Plug In
Dimensions 104.5 x 71 x 12 mm
8 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
389,75
(excl. BTW)
471,60
(incl. BTW)
Aantal stuks
Per stuk
1 +
389,75 €
Related Products
The Pilz PNOZsigma series expansion module has 2NO ...
Description:
The Pilz PNOZsigma series expansion module has 2NO contact configuration. It has a supply voltage of 24VDC and 3 outputs. It provides reinforcement and increases the number of safety contacts on a base device. The contact extension block expands an ...
The Pilz PNOZsigma series contact expansion module has ...
Description:
The Pilz PNOZsigma series contact expansion module has 4 safety contacts(NO) and 1 auxiliary contact(NC). The contact expansion module expands an existing circuit. As the output relays are monitored via the base units feedback loop, the safety function on the ...
Extension modules for PNOZ sigma series safety blocks.The ...
Description:
Extension modules for PNOZ sigma series safety blocks.The extension blocks provide reinforcement and increase the number of safety contacts on a base device.The contact extension block expands an existing electrical circuit. Safety is still guaranteed, even if a component fails.Removable ...
The Pilz PNOZmulti series, safe semiconductor output module ...
Description:
The Pilz PNOZmulti series, safe semiconductor output module is the latest device with 5 outputs. It has a supply voltage rating of 24VDC. It has semi-conductor output of 2A(max) and is available in a screw terminal type. Supplied with: Plug-in ...