- RS-stocknr.:
- 882-5927
- Fabrikant:
- RS PRO
12 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
109 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 37,39
(excl. BTW)
€ 45,24
(incl. BTW)
Aantal stuks | Per stuk |
1 - 9 | € 37,39 |
10 - 19 | € 35,89 |
20 + | € 34,78 |
- RS-stocknr.:
- 882-5927
- Fabrikant:
- RS PRO
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- IN
Productomschrijving
RS PRO Shackle Steel Ball Valve Lockout, 7.1 mm, 76.2 mm Attachment Point
This RS PRO valve lockout is a simple and effective solution for protecting your equipment and the people using it. It's designed to be attached to valve handles and to hold them in the closed position. This prevents the damage that would be caused if they were opened by accident.
The lockout is made from a tough steel material and it has a simple, single-piece design. These features give it an extra level of sturdiness, so it will last longer. Once it has been installed, it can be secured further by attaching a padlock through one of its padlock holes, allowing you to limit who has access to the valve.
This type of valve lockout is suitable for a variety of valves, including ball valves, butterfly valves and cylinder valves. It's commonly found in construction environments, factories and power plants.
The lockout is made from a tough steel material and it has a simple, single-piece design. These features give it an extra level of sturdiness, so it will last longer. Once it has been installed, it can be secured further by attaching a padlock through one of its padlock holes, allowing you to limit who has access to the valve.
This type of valve lockout is suitable for a variety of valves, including ball valves, butterfly valves and cylinder valves. It's commonly found in construction environments, factories and power plants.
Features and Benefits
Ball-valve lockout
Attachment point maximum size of 76.2 mm
Attachment point minimum size of 31.8 mm
Lock shackle maximum diameter of 7.1 mm
Steel material
Dimensions of 180 mm x 100 mm x 150 mm
Attachment point maximum size of 76.2 mm
Attachment point minimum size of 31.8 mm
Lock shackle maximum diameter of 7.1 mm
Steel material
Dimensions of 180 mm x 100 mm x 150 mm
Specificaties
Kenmerk | Waarde |
---|---|
Type | Ball Valve Lockout |
Material | Steel |
Attachment Point Minimum Size | 31.8mm |
Attachment Point Maximum Size | 76.2mm |
Lock Shackle Maximum Diameter | 7.1mm |