Omron PLC Expansion Module Output Terminal 16 Output 24 V dc 115 x 53.1 x 49.7 mm

  • RS-stocknr. 746-3095
  • Fabrikantnummer DRT2-OD16-1
  • Fabrikant Omron
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

Transistor Remote I/O Terminals

Allows I/O expansion with transistor terminals
Wide variety of data, such as maintenance system data, can be collected without affecting the productivity of the control system
Valuable information can be collected and managed through the network, including information on the communications power supply voltage levels, unit wear and tear, and equipment operating information
Expansion via Expansion I/O Units
With no communications baud rate settings required and detachable terminal blocks, maintenance is easier

Omron DRT2 Temperature Input Terminals

Specificaties
Kenmerk Waarde
For Use With DRT2 Series
Module Type Output Terminal
Output Type PNP
Number of Outputs 16
Voltage Category 24 V dc
Length 115mm
Width 53.1mm
Depth 49.7mm
Dimensions 115 x 53.1 x 49.7 mm
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
403,30
(excl. BTW)
487,99
(incl. BTW)
Aantal stuks
Per stuk
1 +
403,30 €
Related Products
Omron's CP1L series offers the compactness of a ...
Description:
Omron's CP1L series offers the compactness of a micro-PLC with the capability of a modular PLC. The range is not only compact, it is scaleable too, and has a faster processing speed than other controllers. Max. switching capacity: 2A @ ...
EA-IF-U1 USB INTERFACE. Can be retrofitted, simple to ...
Description:
EA-IF-U1 USB INTERFACE. Can be retrofitted, simple to install using plug and playSimple configuration via setup menu on the deviceGateway function with 2 cards (PSI 9000)Simple networking of different devicesMaster-slave mode supportShare-bus mode supportGalvanic isolation up to 2000 V.
Ideal for use with quadrature encoders up to ...
Description:
Ideal for use with quadrature encoders up to 50kHz, this module suits 5//02 or higher CPU’s and also offers compare, range, rate and sequencer modes of operation. 4 isolated transistor outputs (5 to 30Vdc sink)Count range -32767 to +32767Internal (program) ...
For connecting conventional sensors for the acquisition of ...
Description:
For connecting conventional sensors for the acquisition of current and voltage signals2 inputs, 0-20 mA, 4-20 mA, 20 mA, 0-10 V, 10 V, 2-wire connection methodHigh accuracy of measurementExtremely rapid acquisition of measurement valuesExcellent noise suppression and common mode rejectionMeasurement ...