RS PRO Through Beam (Fork) Photoelectric Sensor with Fork Sensor, 30 mm Detection Range
Looking for a through-beam sensor for detecting objects? Choose this fork-style photoelectric sensor from RS PRO. It's easy to use as it features U-shaped photoelectric sensors with LED (light-emitting diode) indicators.
The sensor's housing is made of an aluminium alloy material, so it's strong and resistant to corrosion. It's also well-suited to outdoor installations as it has an Ingress Protection (IP) rating of IP67. This means it's dust-tight and can withstand submersion in one metre of water for up to 30 minutes. For added safety in the event of faulty wiring, the device will cut power to the transmitter's sensitive electronic circuits for protection against reverse polarity.
Features and Benefits
Detection range of 30 mm
Through-beam (fork) detection type
4-wire electrical connection
Cable length of 2 m
Aluminium alloy housing material
Ingress Protection (IP) rating of IP67
Infrared light source
Maximum current of 15 mA
Maximum DC voltage of 30 V
Maximum operating temperature of +55°C
Minimum operating temperature of -15°C
Panel mounting type
LED (light-emitting diode) optical technology
PNP (Positive Negative Positive) NO (Normally Open) output type
Response time of less than 1 ms
Fork sensor style
Meets CE (Conformité Européenne) and IEC (International Electrotechnical Commission) standards
RS PRO Through Beam (Fork) Photoelectric Sensor with Fork Sensor, 30 mm Detection Range
Looking for a through-beam sensor for detecting objects? Choose this fork-style photoelectric sensor from RS PRO. It's easy to use as it features U-shaped photoelectric sensors with LED (light-emitting diode) indicators.
The sensor's housing is made of an aluminium alloy material, so it's strong and resistant to corrosion. It's also well-suited to outdoor installations as it has an Ingress Protection (IP) rating of IP67. This means it's dust-tight and can withstand submersion in one metre of water for up to 30 minutes. For added safety in the event of faulty wiring, the device will cut power to the transmitter's sensitive electronic circuits for protection against reverse polarity.
Features and Benefits
Detection range of 30 mm
Through-beam (fork) detection type
4-wire electrical connection
Cable length of 2 m
Aluminium alloy housing material
Ingress Protection (IP) rating of IP67
Infrared light source
Maximum current of 15 mA
Maximum DC voltage of 30 V
Maximum operating temperature of +55°C
Minimum operating temperature of -15°C
Panel mounting type
LED (light-emitting diode) optical technology
PNP (Positive Negative Positive) NO (Normally Open) output type
Response time of less than 1 ms
Fork sensor style
Meets CE (Conformité Européenne) and IEC (International Electrotechnical Commission) standards