Souriau SMS Series Male Keying Plug for 16 Size Contacts

  • RS-stocknr. 908-3338
  • Fabrikantnummer SMSPKE3
  • Fabrikant Souriau
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: BE
Productomschrijving

Souriau SMS Series Quick Mating Discrimination Pin

A discrimination pin which can be inserted into the discrimination cavities of the SMS Quick Mating cable and PCB mount connectors to eliminate connector mismatching.

Souriau SMS Series Quick Mating Wire to Board Connectors

Specificaties
Kenmerk Waarde
Accessory Type Polarizing Key
Series SMS
1800 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 20)
0,373
(excl. BTW)
0,451
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
20 - 80
0,373 €
7,46 €
100 - 240
0,255 €
5,10 €
260 - 480
0,235 €
4,70 €
500 - 980
0,226 €
4,52 €
1000 +
0,186 €
3,72 €
*prijsindicatie
Related Products
Teeplug THB.387 are IP68 circular connectors containing screw ...
Description:
Teeplug THB.387 are IP68 circular connectors containing screw terminals in a selection of configurations. These connectors are keyway coded to ensure correct assembly and are quick and simple to install. The screw terminal makes these waterproof / weatherproof connectors much ...
MTA-156 (Mass Termination Assembly) 3.96 mm pitch connector ...
Description:
MTA-156 (Mass Termination Assembly) 3.96 mm pitch connector system for labour and cost saving mass termination of wires in wire-to-board and wire-to-wire applications. These MTA-156 connectors are based on IDC (insulation displacement contact) technology allowing one-step assembly and eliminating the ...
WR-BHD IDC ribbon cable header connectors with a ...
Description:
WR-BHD IDC ribbon cable header connectors with a 2.54mm pitch. These 2 row wire to board 2.54mm cable mount IDC ribbon cable headers have a grey UL04-V0 PBT insulator and stamped gold plated copper alloy contacts.
A range of low profile 1.27 mm Pitch ...
Description:
A range of low profile 1.27 mm Pitch Picoflex Headers for use with 90327 Series housings, see stock number 324-8047 typical. Fitted with friction lock, polarisation and stamped contacts with in-line flat tabsRigid solder tails require 0.8mm hole.